SIT1602BI-22-33E-33.330000E

Oscillators

An oscillator is a circuit designed to generate an continuous output in the form of alternating or modulated waves that are of different frequencies. The frequency of an oscillator is determined by the components used in the circuit.

The SIT1602BI-22-33E-33.330000E is an example of an oscillator. It is a low-cost, low-power, high-performance oscillator, operating at a frequency of 33.3 MHz. This oscillator is used in many applications requiring an output signal with accurate frequency characteristics.

This oscillator has a wide range of applications. It can be used in many types of electronic circuit design, including frequency synthesis, frequency stabilization, frequency hopping, signal timing, and frequency measurement. It can also be used in radio receivers and transmitters, digital televisions, satellite receivers, and cellular phones.

The SIT1602BI-22-33E-33.330000E oscillator operates on a basic operating principle that creates an electric wave with a specific frequency. This oscillator consists of an active component and a passive component. The active component in this oscillator is a transistor. The transistor acts as a switch to generate the oscillator signal by cutting off and turning on current at a particular frequency. The passive component in the oscillator is an inductor or capacitor. This component helps to store energy during the off-cycle of the oscillator.

The SIT1602BI-22-33E-33.330000E oscillator works in a closed loop. The output of the transistor acts as the input to the inductor or capacitor. Then the energy is collected and stored by the inductor or capacitor and then released when the transistor turns on. As the transistor cuts off and turns on at the specific frequency, the oscillator generates a continuous sine wave output at the selected frequency.

The SIT1602BI-22-33E-33.330000E oscillator is an accurate and reliable source of frequency measurement or generation. It can be used in many applications such as frequency synthesis, frequency stabilization, frequency hopping, signal timing, and frequency measurement. It is also used in radio receivers and transmitters, digital televisions, satellite receivers, and cellular phones.