Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	1.3µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.1mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	1.8V
Output:	HCMOS, LVCMOS
Function:	Standby (Power Down)
Frequency:	66MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: SIT1602BI-31-18S-66.000000X

Introduction

Oscillators are electronic circuits or devices that produce repetitive electrical signals. Any type of oscillator requires a power source and a feedback path that includes an "amplifier, detector and filter." SIT1602BI-31-18S-66.000000X is one of such oscillator series, produced by JinYuan Company. This type of oscillator has been developed for frequency control and precision tuning. In this article we will discuss the application fields and working principle of SIT1602BI-31-18S-66.000000X.

Application fields

SIT1602BI-31-18S-66.000000X is suitable for applications where small switching frequencies and low power consumption are required. A wide range of applications include electronic clocks, watches and calculators, audio equipment, computer communication networks and other portable electronic devices. Additionally, it can used in the areas of sensors and instrumentation, telecommunications, automotive, consumer and industrial products.

Working principle

The SIT1602BI-31-18S-66.000000X oscillator series works by using specialized circuits that convert direct current (DC) into an alternating current (AC). When power is supplied, a current is generated and is then fed to a voltage controlled oscillator (VCO). The VCO converts the DC current into an AC waveform and amplifies it. The amplified AC waveform is then fed to an amplifier stage where it is amplified further. After amplification, the AC waveform is fed to a frequency divider stage. The frequency divider reduces the original frequency of the waveform by setting the divider ratio. The frequency divided waveform is then sent to a detector stage, where the frequency is detected and in turn, controlled. Finally, the original AC waveform is output from the oscillator.

Conclusion

The SIT1602BI-31-18S-66.000000X series of oscillators designed by JinYuan are reliable electronic devices that provide a variety of applications with precision frequency control and fine tuning capabilities. With its low power consumption and small switching frequencies, the device is ideal for use in a wide range of applications such as consumer electronics, portable devices, sensor and instrumentation, telecommunications, and automotive products. In addition, the working principle of the SIT1602BI-31-18S-66.000000X series is a combination of DC-to-AC conversion, voltage control, amplification, frequency division, and detection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description