SIT1602BI-31-XXE-27.000000X

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	4.2mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	HCMOS, LVCMOS
Function:	Enable/Disable
Frequency:	27MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

).Oscillators
SIT1602BI-31-XXE-27.000000X is a type of oscillator, which is a circuit that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators are used as components in a variety of applications such as radios, television, hearing aids and audio amplifiers, and also used to generate the clock signal in computers and other digital systems. This type of oscillator uses an amplifier and a negative feedback network to generate a sinusoidal waveform. The amplifier converts input signal into an output signal, and the negative feedback network provides a signal to reduce any distortion caused by the amplifier. This signal is usually passed through a low pass filter to remove any harmonics that may have been present in the signal.The oscillator can also be used to produce other waveforms, such as a square wave or a triangle wave, depending on the characteristics of the amplifier and feedback circuit. The amplitude and frequency of the output signal can also be adjusted by varying the gain of the amplifier and the resistance of the feedback network. SIT1602BI-31-XXE-27.000000X is an especially efficient, high-accuracy oscillator due to its low power consumption and its high frequency stability. In addition, its low jitter and phase noise allow it to be used in applications such as frequency synthesizers and ultra-stable communication systems. This type of oscillator is typically used in high-end audio equipment, data networks, digital systems, and military and aerospace systems. The working principle of the oscillator revolves around the negative feedback network. The input signal is amplified and then fed back to the input in an inverted form. This creates a loop, in which the energy is continuously cycling around and amplifying the signal until it reaches a steady state. The resistors and capacitors in the feedback network determine the characteristics of the waveform, such as the frequency and the amplitude.In summary, SIT1602BI-31-XXE-27.000000X is a type of oscillator used to produce a periodic, oscillating signal. It is an efficient, high-accuracy oscillator due to its low power consumption and high frequency stability. It is commonly used in the audio and data equipment and is also used in frequency synthesis and ultra-stable communication systems. Its working principle revolves around the negative feedback network, which allows it to produce a high-quality waveform at a precise frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description