SIT1602BI-32-30S-40.500000X

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	4.3µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	3V
Output:	HCMOS, LVCMOS
Function:	Standby (Power Down)
Frequency:	40.5MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are often used as cornerstones in the design of electronic circuits and systems. This is because they are capable of providing a precise and stable signal for timing and synchronization. One such oscillator is SIT1602BI-32-30S-40.500000X, which serves a variety of applications and relies on specific working principles to be able to function properly.

Application Field

The SIT1602BI-32-30S-40.500000X can be used in a wide range of applications, from those that require precise and accurate timing signals to those that require robust and reliable frequency references. Specifically, it is suitable for use in communications systems, consumer electronics systems, industrial control systems, automotive systems, medical systems, and embedded systems. Additionally, this oscillator can also be used for power supply synchronization, system clock references, motor control applications, RF transceivers, and timing, instrumentation, and control circuits.

Working Principle

The SIT1602BI-32-30S-40.500000X is a four-pin oscillator that intermittently switches between high and low states. The switching is done by an internal oscillator and buffer circuit. This oscillator is driven by two active parts, a collector-emitter transistor and an N-channel FET. The transistor is used to switch the output voltage from low to high, while the N-channel FET is used to switch the output voltage from high to low. When one of the active parts is on, the other is off, and vice versa. This allows the oscillator to generate a series of high and low pulses at a predetermined frequency.As the oscillator circuitry is powered, the output current flows more freely whenever the active pin\'s current is at a maximum. Consequently, the generated voltage increases until the point of saturation. When the saturation point is reached, the opposite active component is then turned on and the output voltage decreases. This cycle continues to repeat at a predetermined rate, allowing the SIT1602BI-32-30S-40.500000X to provide an accurate and stable frequency output.

Conclusion

The SIT1602BI-32-30S-40.500000X is a reliable and cost-effective four-pin oscillator that can be used for a variety of applications. It consists of an oscillator and buffer circuit with two active components, a collector-emitter transistor and an N-channel FET, which switch between high and low states to generate accurate and stable pulses. As a result, this oscillator is widely used for power supply synchronization, system clock references, and other critical functions in a wide range of consumer electronics, automotive, medical, and embedded systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description