SIT1602BI-72-28N-30.000000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit that produces continuous waveforms, usually alternating voltage and current, in order to generate a specific frequency or range of frequencies or to provide a precise timing reference. In industrial automation applications, oscillators are used to provide the clock signal to a CPU or other digital circuitry, as well as for various electrical signal generation needs. Oscillators can be categorized by method of operation, such as the type of resonator or the type of feedback.

One such oscillator which can provide low-jitter, accurate clock signals is the SIT1602BI-72-28N-30.000000D. This oscillator is a dual output crystal oscillator with one output in two-phase push-pull or single-ended operation and the other output in single-ended operation. It features a wide frequency range, low phase noise, sampling rates from 16-500 KHz and low jitter levels.

The SIT1602BI-72-28N-30.000000D is based on a quartz crystal resonator and so its frequency is determined by the properties of the quartz crystal. Quartz crystals can be cut in various shapes, sizes and thickness and so this allows for the production of crystal oscillators with precise, reproducible frequencies. The quartz crystal operates by the piezoelectric effect: The crystal resonator expands and contracts in response to the applied electric field and this creates an alternating voltage and current which produces the output waveform of the oscillator.

The main application for the SIT1602BI-72-28N-30.000000D is for use in communications, data acquisition, test and measurement, instrumentation and control/automation systems. Its low-jitter and low-phase-noise characteristics make it suitable for applications where signals must be transmitted over long distances with minimal distortion. It can also be used as a highly accurate timing reference in applications such as digital logic, embedded systems and microprocessor-based systems.

In summary, the SIT1602BI-72-28N-30.000000D is a low-jitter, accurate crystal oscillator that is widely used in industrial automation applications. It operates by the piezoelectric effect of a quartz crystal resonator to generate its output waveform and can be used for applications where accuracy and low-jitter clock signals are needed. As a result, the SIT1602BI-72-28N-30.000000D is an essential component in many industrial automation systems.

The specific data is subject to PDF, and the above content is for reference