SIT1602BI-73-33S-25.000625D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical components used to generate signal waveforms with a periodic frequency range. The SIT1602BI-73-33S-25.000625D is one example of an oscillator, and is typically employed in applications that require low jitter and output chirp free waveforms.

The SIT1602BI-73-33S-25.000625D is a broadband, low-power BAW-mode oscillator that is ideal for consumer electronics with a wide variety of applications in cell phones, navigation devices, and audio and video interconnects. It measures 1.3mm x 0.8mm x 0.6mm, has an output frequency range of 25.000625 to 25.000000 MHz, and has an output amplitude of +15 dBm into 50 ohms. It also features low jitter of 0.2ps RMS and low phase noise of -180 dBc/Hz at 1kHz offset.

The SIT1602BI-73-33S-25.000625D utilizes a resonator structure that consists of a combination of a ring resonator and a Double Ito Resonator (DIR). This structure increases the effective relative permittivity of the resonator which in turn reduces the physical size of the resonator. This smaller physical size enables this oscillator to operate at very low voltages.

The working principle of the SIT1602BI-73-33S-25.000625D relies on two resonators, the ring resonator and the DIR, being energized with a voltage source. The resonators are connected in series with each other and have capacitance C1 and C2. When a voltage is applied, power is delivered to the resonators, resulting in increased energy and creating a standing wave. This standing wave is associated with resonance, which is an effect that occurs when the inductance of the resonators is equal to the resistivity of the resonators. As a result, this creates oscillation.

The oscillation produced by the SIT1602BI-73-33S-25.000625D is of a very high quality, thanks to the combination of the resonators. It not only produces signals that are very clean, but also signals that are consistent and stable. This makes it suitable for many applications where clean and precise signals are required, such as for high speed feedback controllers, tracking radar, Global Positioning Systems (GPS) and medical equipment.

In conclusion, the SIT1602BI-73-33S-25.000625D is a high performance oscillator component utilizing a patented DIR structure. Its broad frequency range, low power consumption and low jitter performance make it ideal for various applications in consumer electronics and medical equipment. The working principle of the oscillator is based on the resonator configuration which enables it to produce high quality signals that are both precise and stable.

The specific data is subject to PDF, and the above content is for reference