SIT1602BI-83-30S-4.000000Y

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	4.3µA
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	3V
Output:	HCMOS, LVCMOS
Function:	Standby (Power Down)
Frequency:	4MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit which emits a periodic, a repetitive time-varying signal, often a sine wave or a square wave. These signals are used to control transient device behavior, calculate sample data points, and generate electromagnetic waves. The SIT1602BI-83-30S-4.000000Y oscillator is a single Bias oscillator built with a low-noise voltage-controlled SAW (VCSW) resonator. It is designed for use in FM (frequency modulation) transmitters, communication systems, and base stations for mobile communication systems, including GSM, CDMA, CDMA2000, and WCDMA.The SIT1602BI-83-30S-4.000000Y oscillator is a type of radio frequency (RF) oscillator. It operates at a frequency range between 30.0 MHz and 40.0 MHz. It has an output power of more than +18dBm achievable at a gain of greater than 15dB. The phase noise is typically -150dBc/Hz at 10 kHz offset from the center frequency. It has a center frequency accuracy of +/-2.0 ppm and a relative frequency stability of +/-1.2 ppm/°C. The operating voltage range is 5V ±0.2V and the supply current is typically between 6mA and 10mA.The SIT1602BI-83-30S-4.000000Y oscillator works using two basic operating principles: the Colpitts and Hartley oscillators. The Colpitts oscillator uses a pair of capacitors and an inductor in a negative feedback loop that is used to form an LC tank. The capacitors are tuned for critical damping and the inductor sets the resonance frequency. The Hartley oscillator uses two tuned circuits with a tapped inductor to set the frequency.The oscillator\'s oscillating frequency is set by the combination of inductance and capacitance. As the amplitude of an oscillator increases, its frequency will decrease due to the effect of electrostatic capacitive reactance. As the amplitude decreases, its frequency will increase due to the positive resistive reactance. This behavior ensures that the oscillator will remain stable over a wide range of electrical signals.The SIT1602BI-83-30S-4.000000Y oscillator has a wide range of applications, including mobile telecommunication systems, communication systems, radar, navigation systems, and satellite applications. It is also used in high-definition television transmission, automotive applications, satellite digital audio broadcasting, broadcasting systems, receiver systems, and instrumentation.The main advantages of using the SIT1602BI-83-30S-4.000000Y oscillator is its low-noise performance, high level of integration, and its compatibility with a wide range of wireless standards. It also has a wide operating temperature range and requires minimal external components. Furthermore, its low cost and long service life make it an attractive option for many types of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description