SIT3807AC-23-18NE-27.000000X

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	31mA
Operating Temperature:	-20°C ~ 70°C
Series:	SiT3807
Voltage - Supply:	1.8V
Output:	LVCMOS
Function:	--
Frequency:	27MHz
Type:	VCXO
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are a type of circuit which generates a periodic, oscillating signal. SIT3807AC-23-18NE-27.000000X is a type of oscillator that is commonly used in telecommunications, television, and radio applications; it is also known as an oscillating crystal. This oscillator is based on the quartz crystals and is used for generating precise signals of high frequency. In this article, we will discuss the applications as well as the working principle of the SIT3807AC-23-18NE-27.000000X oscillator.

Applications

SIT3807AC-23-18NE-27.000000X oscillator is primarily used in radio and television applications, where high frequency, accurate signals are needed. It is also used in telecommunications applications, such as in mobile phones, two-way radios, and satellite communication systems. SIT3807AC-23-18NE-27.000000X oscillators are also used in medical imaging devices and in global positioning systems (GPS). Furthermore, these oscillators are also used in computers and other digitally controlled equipment to generate precise pulses that can be used to control various processes.

Working Principle

The SIT3807AC-23-18NE-27.000000X oscillator is based on quartz crystal technology. Quartz crystals are piezoelectric materials, which means that they can generate an electrical charge in response to mechanical deformation. Specifically, when a quartz crystal is subjected to an external voltage, a small strain is applied to the crystal. This strain causes the crystal to oscillate and produce an electrical signal at a frequency that depends on the crystal’s geometry and size.The SIT3807AC-23-18NE-27.000000X oscillator uses this property of quartz crystal technology to produce an accurate, high-frequency signal. The oscillator consists of two main components: the quartz crystal itself and an oscillator circuit. The quartz crystal is placed inside a metal container, commonly known as a “brick”, which keeps the crystal from coming in contact with external electrical wires. The oscillator circuit consists of an amplifier, which is used to amplify the small electrical current produced by the quartz crystal, and a frequency synthesizer, which is used to tune the frequency of the oscillator.The quartz crystal and oscillator circuit are connected in a feedback configuration, which is also known as the “oscillator loop”. The oscillator is tuned to produce a specific frequency. As the output of the oscillator is fed into the input of the amplifier, the amplifier amplifies the signal and sends it back to the quartz crystal. The energy from the amplified signal then causes the quartz crystal to deform and generate a new signal at the same frequency. This process continues in a cycle, and the oscillator produces a continuous signal at the desired frequency.

Conclusion

In conclusion, the SIT3807AC-23-18NE-27.000000X oscillator is a type of quartz crystal-based oscillator that is commonly used in a variety of applications. It is used to produce precise, high-frequency signals that are required in radio, television, and telecommunications applications. The oscillator works by utilizing the piezoelectric properties of quartz crystals and using a feedback loop to generate a continuous signal at a specific frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description