SIT3807AI-22-33NB-16.000000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits which are designed to continuously generate periodic signals, usually sine waves, without any input from outside. SIT3807AI-22-33NB-16.000000T is a type of oscillator, which is widely used in many fields. This article will discuss the application field and working principle of this oscillator.

SIT3807AI-22-33NB-16.000000T oscillator is suitable for applications such as communications, navigation, and instrumentation. Its superb stability and tight control on frequency offset ensure that the output signal can keep in phase with the external reference signal. In addition, this oscillator has wide bandwidth and very low phase noise, so it is suitable for applications that require a high signal-to-noise ratio such as cellular network and GPS systems. It is also widely used in RFID tags, piezoelectric sensors, and other sensing devices.

The working principle of SIT3807AI-22-33NB-16.000000T oscillator is based on the PLL (Phase-Locked Loop) technique, which has been extensively used in commercial, industrial and military systems. The oscillator has two parts, a voltage-controlled oscillator (VCO) and a phase-locked loop (PLL) circuit. The PLL circuit helps to lock the VCO’s output frequency to an externally applied reference frequency. The PLL circuit also maintains a very high frequency accuracy as the external reference frequency is kept stable.

The PLL circuit consists of a series of feedback loops. The first loop allows the VCO to exhibit good frequency stability, by adjusting the oscillator frequency when any disturbance is detected. The second loop, known as the “frequency-control loop”, is primarily used to minimize any frequency differences between the oscillator output frequency and the externally applied reference frequency. The third loop, also known as the “phase-control loop”, is used to synchronize the output phase of the oscillator with the external reference signal.

Overall, SIT3807AI-22-33NB-16.000000T oscillator is suitable for many applications, thanks to its wide bandwidth, very low phase noise, and great frequency accuracy. The device is based on the PLL technique, which enables the VCO to generate signals which remain in phase with the external reference signal. It is a widely used oscillator and has many applications in communications, navigation, and instrumentation.

The specific data is subject to PDF, and the above content is for reference