SIT3808AC-D2-33EE-5.655800Y

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	70µA
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	33mA
Operating Temperature:	-20°C ~ 70°C
Series:	SiT3808
Voltage - Supply:	3.3V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	5.6558MHz
Type:	MEMS VCXO
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

SIT3808AC-D2-33EE-5.655800Y is an oscillator which belongs to the Oscillators family. It is primarily used as the clock source for microprocessors, microcontrollers, FPGAs, etc. It works by producing an alternating output signal, of a constant frequency, with an extremely high accuracy. This type of oscillator utilizes mathematical equations to accurately determine the frequency of the output signal.

Application Field

The SIT3808AC-D2-33EE-5.655800Y oscillator is a very common type of oscillator that is used in many electronic systems. It can be found in industrial equipment, consumer electronics, aerospace applications, and most any other electronic device. These oscillators can be used to provide precise timing or clock information for microprocessors, microcontrollers, FPGAs, or any other type of electronic system.This type of oscillator is also used in medical devices, where very precise timing and frequency control is necessary. It is also used in consumer mobile devices such as mobile phones, laptops, tablets, and similar devices. It is often used in embedded applications, such as network routers, switches, and other networking equipment.The SIT3808AC-D2-33EE-5.655800Y is an extremely accurate oscillator, and is able to maintain an accuracy of ± 0.05 % or better in most applications. It has a frequency range of 16 MHz to 25 MHz, and can be adjusted to operate within a range of ±25 ppm, depending on specific application requirements.

Working Principle

The SIT3808AC-D2-33EE-5.655800Y oscillator utilizes mathematical equations and phase lock loop (PLL) circuitry to accurately determine the frequency of the output signal. The PLL circuitry consists of an oscillator circuit and filters, which are used to filter the output signal. The oscillator circuit contains an amplifier, an oscillator crystal, and a feedback resistor which are used to control the frequency of the output signal. The output signal is then fed into the filters, which filter the signal and allow for precise frequency control. The frequency of the signal is then adjusted using the PLL circuitry to ensure accuracy. Finally, the output signal is sent to the final loads, such as the microprocessor or microcontroller.

Conclusion

The SIT3808AC-D2-33EE-5.655800Y oscillator is a very common type of oscillator that can be found in many different types of electronic systems. It is an extremely accurate type of oscillator which utilizes mathematical equations and PLL circuitry to accurately determine its output signal frequency. The SIT3808AC-D2-33EE-5.655800Y oscillator can be used in consumer electronics, industrial applications, aerospace and medical equipment, and many other applications that require accurate timing or clock signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description