SIT8008AC-23-33E-18.432000E

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	4.2mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-20°C ~ 70°C
Series:	SiT8008
Voltage - Supply:	3.3V
Output:	HCMOS, LVCMOS
Function:	Enable/Disable
Frequency:	18.432MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Not For New Designs
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators

Oscillators are electronic circuits that produce a continuous and periodic waveform at a certain frequency. They are classified by their waveforms which can include sinusoidal, triangular, and square waves as well as others. Oscillators can also be categorized by the type of active element used–such as thyristors, transistors, operational amplifiers, and crystal oscillators–or by the type of application.The SIT8008AC-23-33E-18.432000E oscillator is a crystal oscillator which is used when a stable and reliable frequency reference is required. It is a simple and reliable oscillator device, because it does not require additional frequency control components and works in a wide range range of frequencies.

SIT8008AC-23-33E-18.432000E Application Field and Working Principle

The SIT8008AC-23-33E-18.432000E oscillator is used in many applications, such as communication systems, communications terminals, computer, satellite navigation and instrumentation applications. The oscillator has high frequency stability and low frequency jitter. It is designed to run on a sinusoidal waveform of 18.432000E megahertz (MHz).The SIT8008AC-23-33E-18.432000E oscillator works on an electromechanical principle. The device is composed of a quartz crystal which is piezoelectric. This means that when electrical energy is applied to the crystal, it vibrates at a frequency determined by its resonance frequency. This frequency is determined by the shape, design, and size of the crystal. When the quartz crystal vibrates, it produces an alternating electric field, which is the desired signal. The alternating voltage induces a series of small currents in the crystal which are proportional to the applied voltage. The output voltage of the oscillator is proportional to the square of the applied voltage.The SIT8008AC-23-33E-18.432000E is designed to produce a stable and reliable sinusoidal waveform at 18.432000E MHz over an extended operating temperature range. It is a low-power device, with a maximum current draw of 26 mA and an output power of 5.4 milliwatts (mW). The device has a typical phase noise of -102 dBc/Hz at 10 kHz offset, a typical pullability of -50 ppm, and a frequency tolerance of +/- 5 ppm at 25C. It is also designed to provide good power consumption and phase noise performance when compared to other oscillators in its class.The SIT8008AC-23-33E-18.432000E oscillator is a reliable and cost-effective solution for many applications. The device is a great choice for applications where a stable and reliable frequency reference is required. It is specifically designed for use in communication systems, communications terminals, computers, satellite navigation and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description