SIT8008AC-23-33E-4.000000E

Oscillators are widely used in a variety of electronic systems and applications for the purpose of generating, detecting, controlling and regulating periodic signals. The SIT8008AC-23-33E-4.000000E is an oscillator of the crystal variety.

Crystals, while known primarily for their use in watches and quartz clocks, are also used in oscillators when accuracy and stability are of the highest priority. The crystals have a very high resonance frequency, and can therefore produce remarkably accurate and stable signals at frequencies much higher than those produced by conventional coils.

The SIT8008AC-23-33E-4.000000E is a two-pin oscillator, using a miniature quartz crystal as its resonator. The crystal is housed inside the two-pin package, and is therefore protected from ambient noise and vibration.

The key features of this oscillator include:

• A frequency stability of ± 0.3ppm over a temperature range of -20°C to +85°C
• A frequency range spanning 2.7 MHz to 33 MHz
• A maximum output frequency of 200kHz
• A maximum output level of 0.5Vp-p

The SIT8008AC-23-33E-4.000000E can be used in a variety of applications, such as clock circuits, oscillators, power supplies and transceivers. Its accuracy and precision make it ideal for use in mobile and PC applications, as well as in precision measurement equipment.

The working principle of the SIT8008AC-23-33E-4.000000E is based on the resonant properties of the quartz crystal. The crystal is connected between two electrodes, and when voltage is applied to them, the crystal resonates at its resonant frequency. This frequency is very stable and is determined by the physical characteristics of the crystal. The output of the oscillator is then taken from the resonance circuit, and can be used for various purposes.

In summary, the SIT8008AC-23-33E-4.000000E is a two-pin oscillator, suitable for use in a variety of applications where accuracy and precision are necessary. Its frequency stability and range make it an ideal choice for clock and timing applications, power supplies and transceivers, as well as precision measurement equipment.