SIT8008ACA8-30E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are electronic components (such as quartz crystals, varactor diodes, capacitors and resistors) used to generate a controlled and precise frequency of a desired waveform. This type of component is used in many applications where precise timing and control of signals is required, including: radio and television, medical imaging, telecommunications, broadcast and more. The SIT8008ACA8-30E programmable oscillator is a prime example of such a component, and this article will discuss its application field and working principle.

One potential application field for the SIT8008ACA8-30E is generation of reference signals for digital-to-analog (D/A) converters. Digital-to-analog converters convert digital signals transmitted from a user’s computer or other digital device into analog signals, allowing for the transmission of analog audio and video signals. The SIT8008ACA8-30E can be used to generate a reference clock signal with a precise frequency. This reference signal can then be used by the D/A converter to ensure that the analog output signal is perfectly synchronized with the digital input signal.

Another possible application field for the SIT8008ACA8-30E is the generation of high-precision signals for radar and sonar systems. The SIT8008ACA8-30E can generate signals from a few hundred kilohertz to a few hundred megahertz, making it suitable for use in radar and sonar systems. By generating a signal of a precise frequency, the system can accurately distinguish and track targets in its field of view. Similarly, the SIT8008ACA8-30E can be used to generate a clock signal for other sensing systems, such as magnetic Resonance Imaging (MRI) and electron paramagnetic resonance (EPR) instruments.

The SIT8008ACA8-30E is a low-noise, low-power programmable oscillator. It comprises a quartz crystal, two varactor diodes, two capacitors, and two resistors all mounted on a 12 mm x 12 mm ceramic substrate. The quartz crystal is the most critical component in the oscillator, as it determines the frequency of the output signal. The crystal is also tuned and matched with the capacitors and resistors to ensure precise accuracy. The two varactor diodes are used to adjust the frequency of the output signal, allowing the signal to be programmed over a wide frequency range.

The SIT8008ACA8-30E also provides excellent timing jitter performance. Jitter is essentially random variations in the timing of electrical signals and is mainly caused by noise in the environment or on the circuit itself. The SIT8008ACA8-30E has a jitter performance of less than 250 femtoseconds (1 fs = 10^-15 s) under a wide range of supply voltage and temperature conditions, ensuring that signal fluctuations due to jitter are minimized.

In conclusion, the SIT8008ACA8-30E is a low-noise, low-power programmable oscillator that can be used to generate precise reference signals for digital-to-analog converters, radar and sonar systems, MRI and EPR instruments and more. Its excellent timing jitter performance ensures that signal fluctuations due to noise are minimized, making it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference