SIT8008AIE3-30E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators are used in a variety of applications. This article specifically focuses on the SIT8008AIE3-30E and its unique application field and working principle. These oscillators are typically used in clocks, frequency counters and microprocessor systems, among other applications. The SIT8008AIE3-30E is a programmable oscillator, which is designed for Special Frequency Applications. It features a temperature stability of +- 10 ppm, a choice of 10 pin dual in-line packages, a selectable frequency range of 0.96 - 30MHz, and a supply voltage range of 3 - 5.5V DC.

The main purpose of this specific oscillator is to provide a stable and exact output frequency, regardless of changes in temperature or other environmental parameters. The use of this programmable oscillator is necessary in order to ensure that the system is reliable and meets the required specifications. The SIT8008AIE3-30E is a three-channel programmable oscillator that can be programmed with a range of preset frequencies or a specific frequency setting. It is also possible to enable or disable the PLL function that is used to reduce the output frequency. The oscillator also includes a low power sleep mode.

In order to work effectively, the oscillator must be powered by a DC source and this should be within the oscillator’s specified range. The input voltage to the oscillator is then applied to the control pins of the oscillator. These control pins allow for programming of the oscillator with a specific frequency. The output of the oscillator is then set to the desired frequency which can be adjusted to within +-300Hz of the programmed frequency.

The SIT8008AIE3-30E also features a wide range of parameters that can be adjusted in order to ensure that the desired output frequency is achieved. These parameters include the amplitude, phase margin, damping factor, and chirp. The amplitude of the output signal should be set to suit the device it is attached to and the phase margin should be set to ensure that the output signal phase will not shift over time. The damping factor should also be set to prevent any oscillation at the output frequency and chirp can be used to allow for varying the frequency of the output signal over a period of time.

The SIT8008AIE3-30E is specifically designed to be used in special applications where a stable, accurate output frequency is required. It is an ideal choice for applications such as clocks, frequency counters, and microprocessor systems. Its unique features and wide range of adjustable parameters make it suitable for these applications as it can provide a reliable, accurate output frequency that can be adjusted to suit specific requirements.

The specific data is subject to PDF, and the above content is for reference