SIT8008AIU8-XXE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are devices that generate fixed frequency waves with a frequency range of up to several dozen MHz. With the continuous development of microelectronic technology, the frequency range of programmable oscillators is gradually expanded from low-end to high end, and the minimum output frequency is no longer limited to tens of kHz or hundreds of kHz. At the same time, programmable oscillators with microcontroller (MCU) enabled frequency sweep, frequency hopping, and external control are available in the market, and their application is more and more. The SIT8008AIU8-XXE is a high-frequency, low-power programmable oscillator. It has a frequency range of 10MHz-680MHz, and can be programmed via the I2C interface, with a fixed frequency jump between 1MHz-10MHz and adjustable frequency jump. With its small size and low power consumption, the SIT8008AIU8-XXE is ideal for use in sensor nodes, automotive electronics, security communication, and other high-frequency, low-power applications. The working principle of the SIT8008AIU8-XXE is based on the technique of dividing capacitors, which uses a circuit of several capacitors to produce a voltage or a frequency which is an exact multiple or fraction of the input frequency. The output frequency of the oscillator is determined by the combination of an external crystal oscillator and an internal capacitor, which is divided by a set of programmable dividers. The frequency of the oscillator can be adjusted by changing the programming of the divider, and the divider can be programmed by sending a signal to it through I2C.The SIT8008AIU8-XXE can also be programmed to change frequency in a controlled manner, known as frequency hopping. Frequency hopping is used in applications such as frequency-hopping spread spectrum (FHSS) and direct-sequence spread spectrum (DSSS). It can also be used for tracking applications, where it is necessary to adjust the frequency to track a moving target. The SIT8008AIU8-XXE is also capable of being externally controlled, meaning that the oscillator can be tuned through an external control signal, such as a voltage or a current. This is particularly useful in applications such as radio systems, where it is necessary to be able to adjust the oscillator frequency in order to track a moving target. The SIT8008AIU8-XXE is an ideal programmable oscillator for applications where a high-frequency, low-power device is needed. It is capable of producing a wide range of frequencies, and can be programmed through I2C, allowing for frequency hopping, frequency sweep, and external control. With its low power consumption and small size, the SIT8008AIU8-XXE can be used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference