SIT8008BC-13-33E-36.864000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators, such as SIT8008BC-13-33E-36.864000E, are three-pin circuits which act as a signal generator, providing an AC signal such as a sine wave or a square wave. Such oscillators are used within electronic circuits in order to produce the desired waveforms, and so can be found in a variety of product sectors including telecommunications, audio-visuals, automotive and aerospace applications.

The purpose of oscillators is to generate a periodic signal on a single pin which can be used to power other circuits and elements within a device. They are independent oscillators are used to isolate signal generation from other components and to provide a stable, periodic signal.

The SIT8008BC-13-33E-36.864000E is an AT-Cut quartz crystal oscillator which operates at the frequency of 36.864 MHz. AT-Cut quartz crystal oscillators exhibit excellent frequency stability, are ideal for Phase Locked Loops (PLLs) and are often used for radio receivers and transmitters. Quartz crystal oscillator technology is widely used for frequency standardisation in microwave and satellite applications due to its excellent frequency stability.

The SIT8008BC-13-33E-36.864000E comprises of several sections. On one side is a quartz crystal element which has a tuning fork construction; when a voltage is applied, this element vibrates and the resonating frequencies cause a signal to be generated. On the other side is the amplifier circuit responsible for amplifying the weak signal into a strong signal. The amplifier circuit is sealed with epoxy resin to avoid interference, ensure higher quality signals, and to protect the circuit from environmental factors.

The SIT8008BC-13-33E-36.864000E oscillator consists of three different terminals, the INPUT(GND) terminal, OUTPUT terminal on the top and the Crystal terminal at the bottom. The INPUT(GND) terminal and the OUTPUT terminal are the places where the external circuit is connected. The Crystal terminal is connected to the quartz crystal element so that the crystal is attracted to the two poles of electric field. The quartz crystal element resonates at various frequencies depending on the construction of circuit and supply voltage, providing a periodic signal at the OUTPUT terminal. The input voltage range of the SIT8008BC-13-33E-36.864000E is 3.3V, with a maximum supply current of 400 mA and an output signal level of TTL LVTTL.

The SIT8008BC-13-33E-36.864000E is capable of operating in temperatures ranging from -20°C to +70°C. It also has an aging rate of less than ±1 ppm in the first year and ±5 ppm in the first five years.

For applications such as chip integrated circuit testing, telecom base stations and communication devices, the SIT8008BC-13-33E-36.864000E oscillator is an ideal choice. Its excellent frequency stability and ability to operate in a wide temperature range make it an optimal choice for these types of applications.

To summarise, the SIT8008BC-13-33E-36.864000E oscillator is a three-pin AT-Cut quartz crystal oscillator which operates at 36.864 MHz. It is a highly stable oscillator which has a wide operating temperature range and excellent frequency stability, and so is suitable for chip integrated circuit testing, telecom base stations and other communication devices.

The specific data is subject to PDF, and the above content is for reference