SIT8008BC-72-18E-6.144000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are an important part of the electronic world and are used to maintain a regular succession of electrical pulses or oscillations over a period of time. They are used in many areas of electronics such as radio communications, military and aerospace electronics, and visible light communications.

SIT8008BC-72-18E-6.144000D is an example of an oscillator. This is a high precision small size quartz crystal oscillator. It is used for applications requiring a 0.5 – 3.3V power supply, frequency output from 6.144MHz to 52MHz, and accuracy at ±10ppm. This oscillator is also suitable for use in wireless applications.

Application Field

The SIT8008BC-72-18E-6.144000D is used in many areas of electronics such as microprocessors, computer peripherals, digital signal processors, security systems, mobile communication systems, medical instruments, and electronic circuitry. It is also used in communications technologies such as television, radio, and satellite communication.

The oscillator is suitable for use in consumer and embedded electronic products, including hemodic, ultrasonic imaging systems, handheld computers, and RFID systems. This oscillator is particularly useful for applications where low noise performance and low power consumption are important factors. This oscillator is also well suited to applications where the response time needs to be fast.

Working Principle

The working principle of SIT8008BC-72-18E-6.144000D oscillator is based on the quartz crystal. The quartz crystal contains piezoelectric properties, which enable it to vibrate at a specific frequency when an applied signal is present. The quartz crystal is placed between two electrodes, which provide the electric field to drive the quartz crystal.

The quartz crystal is cut in a specific shape, usually rectangular, to determine the frequency of vibration. This is one of the key features of the oscillator, as the frequency can be fine-tuned to optimize system performance. The frequency of the oscillation depends on the frequency of the signal applied to the crystal.

The quartz crystal resonates at a specific frequency when the correct electrical signal is applied to the crystal. This is referred to as the “resonant frequency”. The oscillator uses the resonant frequency to maintain a steady electrical output frequency. This output frequency is then used in the various electronic applications.

The quartz crystal within the oscillator acts as an amplifier, and the output signal is a harmonic of the input signal. This is referred to as “frequency multiplication”, as the output signal has a frequency that is multiplied by a particular factor. This harmonic is used to drive the output circuit.

The SIT8008BC-72-18E-6.144000D uses an operational amplifier to provide the gain necessary to generate the output frequency. The amplifier is connected to a feedback circuit that controls the oscillator frequency. The output frequency is then used in the various electronic applications.

The specific data is subject to PDF, and the above content is for reference