SIT8008BCA3-33E

Frequency Stability:	--
Current - Supply (Disable) (Max):	4.2mA
Height:	0.031" (0.79mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Spread Spectrum Bandwidth:	--
Operating Temperature:	-20°C ~ 70°C
Frequency Stability (Total):	±20ppm
Series:	SiT8008B
Voltage - Supply:	3.3V
Output:	LVCMOS
Function:	Enable/Disable
Available Frequency Range:	1MHz ~ 110MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators

Programmable Oscillators are specialized electronic components that generate a periodic voltage or current output waveforms. They play an important role in many types of electronic applications, from clock timing and synthesizers to waveform generation, from radio wave communications to ultrasound equipment. The SIT8008BCA3-33E is a specific type of programmable oscillator designed for frequency control and clock synchronization. The SIT8008BCA3-33E is a temperature-controlled crystal oscillator (TCXO), an oscillator designed to compensate for frequency drift caused by temperature. It uses a temperature-compensated oscillator (TCO) crystal in combination with temperature compensation control to obtain precise frequency control characteristics for communications clocks, digital signal processors, or other temperature-sensitive systems. The clock generation crystal frequency can be adjusted from its nominal value to a higher frequency using a digital control interface. The SIT8008BCA3-33E utilizes frequency synthesizing techniques to provide a large frequency range, in order to accommodate applications requiring precise frequency performance over a wide range of frequencies. Its supply voltage range is +1.62V to +3.63V, making it suitable for many applications including portable communications technology, GPS, and automotive electronics. It features an output signal strength of +0.9V max, a phase noise of −119dBc/Hz @ 100kHz, a start-up time of 3.3ms, and an output logic level of LV/HV. The SIT8008BCA3-33E is designed with flexibility in mind and is compatible with many different types of oscillators and frequencies. This makes it suitable for a wide range of applications, from mobile phone and radio signal transmission to medical imaging and clock synchronization. The SIT8008BCA3-33E is ideal for use in embedded systems, microwave electronics, and other high-performance, temperature-sensitive applications. In addition to frequency control and clock synchronization, the SIT8008BCA3-33E also offers excellent stability, temperature control, and low power consumption for applications requiring precise frequency control. It has a typical frequency stability of ±5ppm, meaning it can maintain the same frequency over a wide temperature range. It also has a maximum current consumption of only 200uA, making it suitable for low-power applications. The SIT8008BCA3-33E is designed to be easy to use and integrate, and it offers a wide range of features and configuration options. It also has built-in programmable features including frequency adjust, temperature coefficient adjust, automatic calibration, frequency sweep, and command override. With its wide range of features and compatibility with numerous oscillators, the SIT8008BCA3-33E offers a versatile, cost-effective solution for frequency control and clock synchronization.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description