SIT8008BCB2-25N

Frequency Stability:	--
Current - Supply (Disable) (Max):	4.2mA
Height:	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.2mA
Spread Spectrum Bandwidth:	--
Operating Temperature:	-20°C ~ 70°C
Frequency Stability (Total):	±20ppm
Series:	SiT8008B
Voltage - Supply:	2.5V
Output:	LVCMOS
Function:	--
Available Frequency Range:	1MHz ~ 110MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the SIT8008BCB2-25N Oscillator

The SIT8008BCB2-25N is a programmable oscillator designed for a variety of digital, telecommunications and consumer technologies applications. This quartz crystal-based oscillator is designed to place a simple, cost-effective and reliable timing solution in your hands. It is suitable for LCDs and TFTs with a 20ppm to 50ppm tolerance and an operating temperature range from -40°C to +120°C. The SIT8008BCB2-25N is available in both surface mount (SMD) and through-hole (TH) versions, allowing maximum flexibility in design.

Application Fields

The SIT8008BCB2-25N can be used in a wide range of applications, such as in consumer electronics products, industrial controls, automotive electronics, consumer communications, computers and peripherals, military and aerospace equipment, networking and telecom, and consumer audio products. For example, it can be used to power the backlight in a laptop, to enable GPS navigation in a car, to enable HD video streaming on a mobile phone, or to enable communication in a security system. In consumer electronics, the SIT8008BCB2-25N can be used to generate sharp edge waveforms with great accuracy, making it suitable for televisions, monitors, cameras, digital projectors and other consumer electronics devices. In industrial applications, the SIT8008BCB2-25N can be used for pulse-width-modulation (PWM), for data transmission, for sample and hold, and even for temperature compensation. In automotive electronics, the SIT8008BCB2-25N can be used for powertrain control, active suspension, and 4-wheel-drive control systems.

Working Principle

The SIT8008BCB2-25N is a quartz crystal oscillator (QCO) composed of an electrical circuit, a quartz crystal and a few other passive components. Inside the oscillator, the quartz crystal acts like a natural “resonator”, allowing the oscillator to produce a consistently accurate and stable time signal. At the heart of the oscillator, the quartz crystal is placed between two electrodes. An alternating current that is connected to the two electrodes flows through the quartz crystal, causing it to vibrate at its “resonant frequency” (the frequency at which it naturally oscillates). The frequency of this signal is determined by the structure and size of the quartz crystal. The signal is then amplified before being sent out as an output signal. The SIT8008BCB2-25N is programmable, allowing users to adjust its frequency output, output type and magnitude, while still maintaining the time accuracy of the oscillator.

Conclusion

The SIT8008BCB2-25N is a quartz crystal-based programmable oscillator designed for a variety of applications. It provides a cost-effective and reliable timing solution for applications such as consumer electronics, industrial controls, automotive electronics, consumer communications, computers, and other products. The working principle of the oscillator is based on the quartz crystal, which acts as a natural resonator, producing an accurate and stable timing signal. With its adjustable features, the SIT8008BCB2-25N can be tailored to meet the needs of virtually any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description