SIT8008BCB3-30S

Frequency Stability:	--
Current - Supply (Disable) (Max):	4.3µA
Height:	0.031" (0.79mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Spread Spectrum Bandwidth:	--
Operating Temperature:	-20°C ~ 70°C
Frequency Stability (Total):	±20ppm
Series:	SiT8008B
Voltage - Supply:	3V
Output:	LVCMOS
Function:	Standby
Available Frequency Range:	1MHz ~ 110MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

< p>Programmable oscillators are electronic devices used to generate precise and accurate frequencies, usually in the range of 0.5 Hz to 10 MHz. The SIT8008BCB3-30S is an example of such an oscillator. It is programmable, which allows it to be used in various applications and is also capable of being adapted to specific needs.The SIT8008BCB3-30S is a versatile oscillator, meaning it can produce multiple frequencies with the same hardware. The frequency range of this device is 400 kHz - 30 MHz and its output voltage range is 3 - 8 V. It is also extremely accurate, with typical frequency accuracy up to ±25 ppm (parts per million). This makes the SIT8008BCB3-30S suitable for precise and consistent signal generation.The applications of the SIT8008BCB3-30S include clock signal generation for microprocessor and network clocks, as well as signal generation for synthesizers and sampling oscilloscopes. In addition, it is also often used as an audio frequency oscillator for audio and test equipment.The working principle of the SIT8008BCB3-30S is based on a PLL (Phase Lock Loop) oscillator circuit. The PLL oscillator chip is based on a voltage-controlled oscillator (VCO) that produces a signal with a frequency proportional to the control voltage. This control voltage is generated by the PLL circuit using a reference frequency, and it is used to adjust the VCO frequency until it matches the reference frequency. The difference between the VCO frequency and the reference frequency is then used to create a signal that is used as the output of the oscillator.The SIT8008BCB3-30S is a versatile programmable oscillator which is commonly used in many industrial, commercial and consumer applications. With its excellent accuracy and a wide frequency range, it is an ideal choice for precise signal generation in these applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description