SIT8008BCL8-30E

Frequency Stability:	--
Current - Supply (Disable) (Max):	4.2mA
Height:	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Spread Spectrum Bandwidth:	--
Operating Temperature:	-20°C ~ 70°C
Frequency Stability (Total):	±20ppm
Series:	SiT8008B
Voltage - Supply:	3V
Output:	LVCMOS
Function:	Enable/Disable
Available Frequency Range:	1MHz ~ 110MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators are specialized electronic components or circuits used to generate a continuous, periodic, oscillating waveform. Programmable oscillators are often used in electronic circuits, such as microcontrollers, to provide a stable, known, frequency range. One example of this technology is the SIT8008BCL8-30E. This product is a programmable oscillator, able to operate in a frequency range of 800kHz to 8MHz.The SIT8008BCL8-30E is a CMOS oscillator, composed of an output buffer, a resistor-capacitor (RC) oscillator circuit, a frequency select (FS) resistance array, and a voltage control input (VCI) capacitor array. The output buffer is responsible for supplying the oscillator signal to the output, while the resistor-capacitor circuit is responsible for generating the predetermined frequency. The frequency select array and voltage control input array are responsible for storing the predetermined frequency, and adjusting the frequency within range, respectively.The SIT8008BCL8-30E features a low cost, small form factor, and is relatively easy to use. This part is often used in automotive, industrial, and consumer applications. The part is extremely popular because it saves time and money, offering high performance at a low cost and high efficiency operation.The SIT8008BCL8-30E is a versatile component and perfectly suited for virtually any application requiring oscillator frequency tuning from 800kHz to 8MHz. Some applications the component may be used for include motor controller sensor frequency tuning, robotic system servo motor tuning, timer device or equipment tuning and digital signal processor clock frequency adjustment. The SIT8008BCL8-30E can be used as a clock source in frequency synthesizers and as a signal generator in remote sensing applications. Also, this component is a valuable tool for signal integrity design, frequency calibration and test measurement. It also enables a PLL based signal generator to output synthesized frequencies in the desired frequency range. In addition, this component is used as part of an embedded system where there is a need to source a stable frequency source. This component offers a wide tuning range with an Accu-to-PPM ratio which is reliable, stable and versatile enough to accommodate any embedded system application. The working principle of the SIT8008BCL8-30E is based on an RC oscillator circuit, where the frequency is determined by the capacitance and resistance of the components within the circuit. The frequency can be adjusted by changing the resistance of the FS array or the capacitance of the VCI array. This oscillator has a frequency range of 800kHz to 8MHz, allowing for a wide range of applications in automotive, industrial, and consumer sectors.In conclusion, the SIT8008BCL8-30E is a versatile and cost effective programmable oscillator. This component offers an efficient and reliable solution to any application requiring a stable frequency source between 800kHz and 8MHz. The component is used in a variety of automotive, industrial, and consumer applications, where it offers an inexpensive yet reliable source of high-performance frequency tuning.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description