SIT8008BCT3-18S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators is an important type of oscillator that can be programmed to suit an application. The frequency, waveform, stability and power consumption of oscillators can all be adjusted to provide the needed performance. A programmable oscillator, such as the SIT8008BCT3-18S, offers ideal performance for a wide range of applications in both analog and digital circuits.

The SIT8008BCT3-18S is a high-performance clock oscillator IC with features that enable it to generate a wide range of complex waveforms. It is suitable for use in a wide range of applications, such as motor control, clock and timing, communications and networking, audio and video, and instrumentation.

The SIT8008BCT3-18S is a versatile oscillator that can be programmed for various frequencies, waveforms and stability levels. It is designed to operate at a maximum frequency of 3.2 GHz. It has an adjustable frequency range of 25MHz to 800MHz, allowing for great flexibility in frequency control. The SIT8008BCT3-18S also features programmable output clock type (LVCMOS, LVDS), slew rate, rise/fall time, and delay time.

The SIT8008BCT3-18S is capable of providing finely tuned output waveforms with high accuracy and low jitter, making it ideal for the design of sophisticated systems. It can be used in applications ranging from simple clock oscillators to complex clock generation and control systems.

The working principle of the SIT8008BCT3-18S is based on the principles of phase-locked loops (PLLs). A PLL is an electronic circuit that uses phase comparison and signal feedback to lock a signal frequency to a reference frequency. The SIT8008BCT3-18S utilizes a voltage-controlled oscillator (VCO), a phase detector and a charge pump to achieve a high accuracy and low jitter signal.

The VCO is a device that produces an output signal whose frequency can be changed by adjusting its control voltage. The output signal from the VCO is then compared to a reference signal from an external source by the phase detector. The output of the phase detector is then sent to the charge pump, which generates a control voltage for the VCO. This process creates the feedback loop that is necessary for the PLL to produce the desired output signal.

The output signal from the PLL is then controlled by an external resistor. This allows the user to program the frequency, waveform, and stability of the output signal. The SIT8008BCT3-18S also features an output slew rate adjustment, allowing for fine tuning of the output waveform.

The SIT8008BCT3-18S is an ideal choice for a wide range of applications, thanks to its versatility and performance. Its programmable output type, frequency range, and slew rate control make it an ideal choice for a wide variety of applications. It is an ideal choice for use in motor control, clock and timing, communications and networking, audio and video, and instrumentation applications, making it a versatile and reliable component for a range of applications.

The specific data is subject to PDF, and the above content is for reference