SIT8008BI-13-33E-34.600000E

Oscillators

The SIT8008BI-13-33E-34.600000E oscillator is an electronic device which produces a periodic signal, usually based on the transference of electrical energy. Oscillators are a class of electrical, mechanical, and electro-mechanical devices that produce repeatable signals with accurate timing characteristics.

Applications

The SIT8008BI-13-33E-34.600000E oscillator is typically used in a variety of applications requiring accurate timing of signals. This includes timer circuitry, synchronized counter-timers, frequency dividers, encoders, commutators, and clock generators. Oscillators can also be used in the control and management of frequency and phase locked systems, as well as for synchronizing outputs from multiple clocks and for frequency compensation.

Working Principle

The SIT8008BI-13-33E-34.600000E oscillator employs a voltage controlled oscillator (VCO) to produce a signal at the desired frequency. The VCO consists of an electronic circuit with an amplification stage and a feedback loop. The signal generated by the VCO is fed back to a phase comparator, which compares the phase of the signal to an external reference frequency. If the two signals are not in phase, the phase error is used to adjust the frequency of the VCO until the two signals are phase locked.

The output frequency of the VCO can be determined by several factors, including the frequency of the reference signal, the gain of the amplifier stage, and the amount of feedback in the loop. The loop gain is typically set to a specific value, which determines the pull-in range of the VCO. This pull-in range sets the frequency variation of the output signal. The output frequency is then either set externally or adjusted automatically with the input voltage.

Conclusion

The SIT8008BI-13-33E-34.600000E oscillator is a type of electronic oscillator that is commonly used in applications requiring accurate timing of signals. It is based on a voltage controlled oscillator which compares an internal signal to an external reference signal and adjusts the output frequency accordingly. The output frequency is adjustable depending on the gain of the amplifier stage and the amount of feedback in the loop.