SIT8008BIB2-25N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators involve the use of specialized circuits to generate a continuous signal with a set, predetermined frequency. This type of technology is used in a wide range of applications from military to consumer electronics and can have many different form factors and features, such as the SIT8008BIB2-25N. This particular device is a Programmable Oscillator that is used for Frequency Synthesizer, Programmable Timer, Low Frequency timing and Frequency Synthesizer applications.

The SIT8008BIB2-25N is a programmable oscillator with a frequency range from 0.5MHz to 25MHz. This frequency range can be programmed via a serial interface that can be either an I2C or SPI, depending on the model. The oscillator is capable of producing a square wave output with an amplitude of 0.7V and rise/fall times of 2ns/3ns. It also has burst mode and pulse width modulation (PWM) capabilities.

The working principle behind the SIT8008BIB2-25N is based on a two-phase voltage controlled oscillator (VCO). The VCO works by combining two sinusoidal signals, modulated by the control voltage, to produce the required output frequency. The control voltage is regulated by an on-chip digital to analog converter (DAC) which is controlled by the serial interface. The VCO output is then used as the clock signal for the timer/frequency synthesizer.

The SIT8008BIB2-25N has a wide range of applications. It is commonly used in Frequency Synthesizers for frequency tuning and frequency hopping, in Timers for duty cycle and timebase control, in Frequency synthesizers for low additive phase jitter and for clock sources for communications and data acquisition systems. It is also used as frequency synthesizers in service related fields such as satellite TV, FM Radio broadcasting, and digital radio services.

In conclusion, the SIT8008BIB2-25N is a programmable oscillator that can be used in a variety of different applications. It has a frequency range of 0.5MHz to 25MHz and comes with a serial interface that can be either an I2C or SPI, depending on the model. The VCO works by combining two sinusoidal signals and the control voltage is regulated by an on-chip DAC. The SIT8008BIB2-25N can be used for Frequency Synthesizers, Timers, and Frequency Synthesizers. It is commonly used in service related fields such as satellite TV, FM Radio broadcasting, and digital radio services.

The specific data is subject to PDF, and the above content is for reference