SIT8009AC-83-33E-133.333300Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electrical circuits used to generate periodic electric signals. These signals can be used as a time reference or in radio communication systems to modulate and demodulate signals. This article will discuss the application field and working principle of the SIT8009AC-83-33E-133.333300Y oscillator.

Application Field

The SIT8009AC-83-33E-133.333300Y oscillator is designed for use in applications ranging from telecommunications devices, computer motherboards, and high performance Portable devices. It is also widely used in modern military applications. The oscillator is rated for operation from 30ckHZ~245 MHz, making it suitable for a wide range of communications devices, including routers and modems.

Working Principle

The SIT8009AC-83-33E-133.333300Y oscillator is based on the principle of "negative resistance oscillation". Negative resistance oscillation is the phenomenon where a signal\'s strength decreases due to the resistive current flowing through the circuit, rather than increasing. This allows the oscillator to generate an output signal at a frequency dependent on the negative resistance of the circuit.

The oscillator circuit consists of an amplifier, a capacitor, and an inductor. The amplifier acts as a "gatekeeper", allowing the current to flow through the capacitor and inductor. When the current reaches a certain level, the amplifier will stop allowing the current to flow. This will cause the output signal to drop, resulting in the negative resistance oscillation.

The oscillator can be tuned to a certain frequency by adjusting the size of the inductor and capacitor. Too large of a capacitor or inductor will cause the current to flow at a slower rate, resulting in a lower frequency output signal. Too small of a capacitor or inductor will cause the current to flow at a faster rate, resulting in a higher frequency output signal.

The SIT8009AC-83-33E-133.333300Y oscillator is designed to be a reliable solution for high performance applications. The frequency of the output signal is adjustable and is accurate within +-100 ppm. This makes it a great choice for applications that require a stable and accurate output signal.

Conclusion

The SIT8009AC-83-33E-133.333300Y oscillator is a reliable solution for applications that require a stable and accurate output signal. It is widely used in high performance telecommunications, computer motherboards, and military applications. The oscillator is based on the principle of negative resistance oscillation and can be tuned to different frequencies by adjusting the size of the inductor and capacitor.

The specific data is subject to PDF, and the above content is for reference