SIT8208AC-23-33S-27.000000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a class of electronic components used to create an alternating electric current signal. Oscillators convert direct current power of a certain voltage into an AC signal with an amplitude, frequency, and waveform that depends on the particular type of circuit used. The SIT8208AC-23-33S-27.000000T is an example of a type of oscillator, a quartz crystal oscillator. Quartz crystal oscillators are widely used in microcontroller and digital system applications due to their stability, low cost, low power consumption, and reliability.

The SIT8208AC-23-33S-27.000000T is classified as a MEMS (Micro Electro Mechanical System) oscillator. This type of oscillator uses a small MEMS structure to resonate at the desired frequency. The main advantages of using MEMS oscillators over conventional quartz crystal oscillators are that they consume less power, provide a lower total harmonic distortion, and are less affected by environmental conditions such as temperature and shock.

The SIT8208AC-23-33S-27.000000T is suitable for applications such as the timing of digital integrated circuits. In these applications, the quartz crystal oscillator produces a signal with a very precise frequency. This signal can then be used to ensure that the digital circuitry will operate at the correct speed. The unique characteristics of the SIT8208AC-23-33S-27.000000T makes it ideal for applications that require low power operation and high accuracy.

The SIT8208AC-23-33S-27.000000T works on the principle of piezoelectricity. Piezoelectricity is the ability of certain crystals to produce an electric field in response to physical stress or strain. The quartz crystal of the oscillator is designed to vibrate at a specific frequency when a voltage is applied to it. The crystal then produces an alternating current signal at this frequency. The signal can then be used to drive a circuitry or other components.

The quartz crystal is manufactured with a certain frequency by cutting it in a particular way. The size of the crystal determines the frequency at which it will vibrate. The SIT8208AC-23-33S-27.000000T is designed to provide a frequency of 27.000000 MHz with ±50 ppm stability. The crystal is also designed to operate over a temperature range of -40 to 85 °C, which makes it suitable for use in automotive and industrial applications.

The SIT8208AC-23-33S-27.000000T is equipped with an internal trimming mechanism so that the frequency can be adjusted as necessary during the manufacturing process. This is done by applying a specific voltage to the trim pin on the crystal. The trim voltage can be adjusted to within ±15 ppm of the nominal frequency.

The SIT8208AC-23-33S-27.000000T is also equipped with a Schmitt trigger input. The Schmitt trigger is a type of signal amplifier that converts an analog signal to a digital signal. This feature makes it possible for the oscillator to be used in digital applications. Finally, the SIT8208AC-23-33S-27.000000T is capable of providing a high-accuracy, low-power frequency signal in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference