SIT8208AC-2F-25E-33.000000X

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	31mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	33mA
Operating Temperature:	-20°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	SiT8208
Voltage - Supply:	2.5V
Output:	LVCMOS, LVTTL
Function:	Enable/Disable
Frequency:	33MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction To Oscillators

Oscillators are specialized circuits that are used to generate electrical signals with an exact frequency. They are widely used in electrical and electronic systems to control the timing and stability of the system. This is due to the fact that oscillators are highly efficient at producing signals with an exact frequency that can be used to control the timing of systems without relying on manual synchronization. This article will focus on SIT8208AC-2F-25E-33.000000X oscillators, their application field and working principle.

SIT8208AC-2F-25E-33.000000X Oscillator Application Field

SIT8208AC-2F-25E-33.000000X oscillators are typically used in applications where frequency stability, low jitter and wide temperature range operation are required. These oscillators provide excellent accuracy and frequency stability across a wide temperature range. They also provide precise synchronization between multiple systems that are distributed over a wide area. This is an ideal choice for communication networks such as GSM, CDMA, PHS and WIMAX.The SIT8208AC-2F-25E-33.000000X oscillator is also used in other communication protocols such as TDMA, GPRS, EDGE and CDMA2000 as well as in embedded systems such as consumer electronics, home automation and Internet of Things (IoT) devices.

SIT8208AC-2F-25E-33.000000X Oscillator Working Principle

Oscillators operate on a closed loop of positive feedback to generate a continuous output signal. The signal is generated by the oscillator as a result of the positive feedback of the input signal. The SIT8208AC-2F-25E-33.000000X oscillator uses a phase-locked loop (PLL) based design to generate the output signal. This design consists of a phase detector, controlled oscillator the low pass filter, and a voltage controlled oscillator (VCO).The phase detector compares the phase of the input signal to the phase of the VCO output. When the input and output signals are in phase with one another, the output voltage remains constant. Any variation between the phases of the input and output signals results in a variation in the output voltage, which in turn changes the frequency of the VCO and provides the loop with positive feedback.The frequency of the VCO is also affected by the external voltage source. This allows the PLL based oscillator to reach a desired frequency. The output frequency of the oscillatorThe output of the PLL based oscillator is stable and free from jitter. This makes it highly suitable for applications that require precise timing or synchronization between multiple systems. It can also provide excellent accuracy and frequency stability over a wide temperature range.

Conclusion

This article has covered the application field and working principle of the SIT8208AC-2F-25E-33.000000X oscillator. This oscillator provides an efficient and stable solution for applications that require precise timing or synchronization between multiple systems. It is also capable of providing excellent accuracy and frequency stability over a wide temperature range.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description