SIT8208AC-2F-33E-13.000000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a class of electrical circuit characterized by a sustained waveform, rather than one that is momentary or transient, and they are used in a variety of applications in engineering, computer science, audio, telecommunications, and other fields of electronics.

One of the types of oscillator used in these fields is the SIT8208AC-2F-33E-13.000000Y. This type of oscillator is composed of an amplifier and a frequency-generating circuit with feedback, and it exhibits stable frequency over a wide temperature range. The primary components of this oscillator are a monolithic integrated circuit, crystal filar, and a resistor. It is designed to operate at a frequency range of 8MHz - 33MHz, supply voltage of 2.0V - 5.5V, and a current consumption of 6mA - 19mA.

The SIT8208AC-2F-33E-13.000000Y can be used in devices such as routers, cellular base stations, modems, remote control systems, and radio communications. It can be employed in any circuit design which requires a stable, fixed frequency, due to its high output stability. The oscillator\'s precise markings, which indicate the frequency and specification, allow for accurate calculations when fitting to a specific circuit.

The working principle of the SIT8208AC-2F-33E-13.000000Y is based on the regenerative feedback mechanism. The monolithic integrated circuit is made up of a phase-locked loop (PLL) and a voltage-controlled oscillator. The PLL receives the input signal then amplifies it and amplifies it to a level higher than the noise-free signal. The amplifier can then provide a precise output frequency which is then compared with the input signal. This comparison creates the regenerative feedback loop which maintains the output frequency at the reference frequency.

The crystal provides the frequency reference for the oscillator and is also used to filter out any spurious signals. The crystal filters out any received signals from outside the frequency range of the oscillator, ensuring that only the set reference frequency is amplified and output from the circuit. The resistor is used to provide additional stability to the oscillator and ensures that the output waveform stays clean and sharp.

Overall, the SIT8208AC-2F-33E-13.000000Y oscillator is a robust and reliable device with various potential applications in different fields. The output frequency range and the high stability of the oscillator mean that it can be used in a variety of projects where precise and reliable frequency control is needed.

The specific data is subject to PDF, and the above content is for reference