SIT8208AC-2F-33E-19.200000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators can be used to generate a periodic signal waveform from a DC input voltage. Among them, SIT8208AC-2F-33E-19.200000X Oscillator is a type of low power quartz crystal oscillator that operates in the 4 MHz to 52 MHz frequency range. It is an IC with an integrated design integrating crystal, circuit and package, with characteristics such as small size, low power consumption, and strong anti-interference ability.

The primary application of SIT8208AC-2F-33E-19.200000X Oscillator is to provide clock signals for communication systems. It can also be used as a frequency reference source in the fields of test and measurement, radar, and navigation. In the consumer electronics industry, such as tablets, mobile phones and computers, it can also be applied in the clocks of various electronic systems.

The working principle of SIT8208AC-2F-33E-19.200000X Oscillator is based on the feedback control of an integrated circuit. When external voltage is input, the oscillation frequency is determined by a quartz crystal, and the output signal is obtained through an external resistor and capacitor, and then sent back to the feedback control, which is then amplified and then output. The output frequency is dependent on the frequency of the quartz crystal in the oscillator, and it is not influenced by changes in the external temperature. This makes SIT8208AC-2F-33E-19.200000X Oscillator very reliable and stable in operation.

In conclusion, SIT8208AC-2F-33E-19.200000X Oscillator is a versatile oscillator for communication systems, with a frequency range of 4 MHz to 52 MHz, and sizes as small as 3.2mm x 5.0mm. It provides clock signals for communications, test and measurement, radar and navigation systems, and is widely used in consumer electronics such as tablets, mobile phones and computers. The working principle of the oscillator is based on the feedback control of an integrated circuit, and the output frequency is determined by the frequency of the quartz crystal. Moreover, it is a low power and anti-interference Oscillator, and is very reliable and stable in operation.

The specific data is subject to PDF, and the above content is for reference