SIT8208AC-31-18S-38.400000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are widely used for various purposes in various fields such as timing, clocks, telecommunication, sensing and control. Among them, SIT8208AC-31-18S-38.400000T oscillator is one of the often used oscillators that is broadly used for multiple applications. For example, they are widely used in electrically firing nitrocellulose and in burst-firing timers. Moreover, they are also applicable for Pc based counter/timers, serial communication systems, digital radiography and medical scanners.

A brief overview of the features and characteristics of SIT8208AC-31-18S-38.400000T oscillator reveals that it comes with a hole diameter of 5.5mm. It has a center frequency of 38.4MHz, a stability of ±25 ppm and wide operating temperature range of -40 to 85° C with medium drive. Furthermore, it provides low power consumption and tight frequency control. It also offers excellent aging along with superior phase noise, waveform and temperature stability. All these features make this oscillator popular among various fields.

SIT8208AC-31-18S-38.400000T oscillator can operate in different modes, such as pull-down and pull-up. In pull-down mode, the oscillator is enabled via low signal. When the signal is low, the oscillator activate pull-down circuit and start oscillation. While in pull-up mode, the oscillator is enabled via high signal. When the signal is high, the oscillator activate pull-up circuit and start oscillation.

The working principle of SIT8208AC-31-18S-38.400000T oscillator is based on the modified phase locked loop technology. The oscillator consists of an amplifier, a voltage controlled oscillator, a phase/frequency detector and a loop filter. The loop filter is designed to provide a stable output frequency of 38.4MHz. The phase/frequency detector is used to compare the output frequency of voltage controlled oscillator with the reference frequency. The output of this detector is the phase and frequency difference signal, which is fed back to the input of the voltage controlled oscillator. The loop filter then captures and preserves proper phase relationships between the output and the reference frequency, which helps the oscillator achieve a stable output of the reference frequency of 38.4MHz.

In summary, SIT8208AC-31-18S-38.400000T oscillator is an important oscillator with many features and applications. It has a hole diameter of 5.5mm and a center frequency of 38.4MHz. With a stability of ±25 ppm and wide operating temperature range of -40 to 85° C with medium drive, it provides excellent aging along with superior phase noise, waveform and temperature stability. Moreover, it has two operating modes, pull-down and pull-up, and works on the basis of phase locked loop technology. Owing to its multiple features and characteristics, this oscillator is highly suitable for electrically firing nitrocellulose, burst-firing timers, Pc based counter/timers, serial communication systems, digital radiography and medical scanners.

The specific data is subject to PDF, and the above content is for reference