SIT8208AC-33-18E-40.500000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators, also known as clock generators or crystal oscillators, are electrical circuits that generate an alternating, often periodic, signal. They are the source of an electrical signal of very precise frequency and normally a fixed phase. In a typical application, an oscillator produces a signal to be fed to a circuit such as an amplifier, or to some other device.

SIT8208AC-33-18E-40.500000 is a common type of oscillator used in electronics. It is a low power crystal oscillator with a frequency of 40.500000MHz. It has an operating temperature range of -25 Celsius to +85 Celsius, and an output voltage swing of 0.8V to 3.3V.

Application Field of SIT8208AC-33-18E-40.500000

SIT8208AC-33-18E-40.500000 can be used as a clock generator in many applications such as frequency synthesis, embedded systems, signal processing, timing and control applications, and mobile communication systems. It can also be used as a clock source for digital-to-analog converters and ADCs, and as a reference clock for network routers and switches.

It is also suitable for use in consumer electronics, digital cameras, telecoms applications, and automotive systems. In particular, it is used for automotive end-to-end Ethernet systems, digital audio jack concepts, and mobile base stations.

Working Principle of SIT8208AC-33-18E-40.500000

The SIT8208AC-33-18E-40.500000 oscillator works by generating a signal of a very precise frequency, based on a quartz crystal. This frequency is generated by the resonance of the quartz crystal. The crystal is driven into resonance by an electric field which is applied across it. The crystal oscillates at a frequency determined by the crystal itself, and this frequency is then amplified by circuitry surrounding the crystal.

The quartz crystal acts as a resonator, and in this application it is used to provide a very precise frequency for the oscillator. The frequency of the oscillator is determined by the properties of the quartz crystal, which have been carefully chosen so that oscillations occur at the desired frequency. The crystal is connected to an oscillator circuit, which amplifies the signal and generates a square wave output. This output is then used to drive other circuits.

The SIT8208AC-33-18E-40.500000 oscillator is also powered by an external DC voltage, and the frequency of the output is determined by the voltage supplied. This makes the frequency of the oscillator adjustable, allowing the frequency of the output signal to be finely tuned for different applications.

The specific data is subject to PDF, and the above content is for reference