SIT8208AC-3F-28S-19.200000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are an essential component in electronic systems. It is responsible for generating AC waveforms, providing timing reference to circuits, and controlling digital frequency. The SIT8208AC-3F-28S-19.200000T oscillator is a crystal oscillator that can operate at 200MHz to provide precise timing and frequency control.

The SIT8208AC-3F-28S-19.200000T oscillator is an analog, 200MHz oscillator that can be used in a variety of applications. It is commonly used in test instruments, robotics, aviation, broadcasting, medical devices, and other applications that require precise timing and frequency control. The oscillator can also be used in communications systems, where it is used to provide low jitter timing signals needed for error-free data transmission.

The SIT8208AC-3F-28S-19.200000T oscillator operates at 200MHz and utilizes a quartz crystal for its frequency reference. The circuit consists of a quartz crystal, oscillator circuit, temperature compensation circuit, oscillation control circuit, and a matching circuit. The quartz crystal is the heart of the oscillator and is responsible for providing the precise frequency reference. The crystal is vibrationally isolated from the oscillator circuit and compensates for any temperature variations by its high temperature stability and low aging coefficient.

The oscillator circuit is responsible for generating the output frequency. It consists of an amplifier, voltage-controlled oscillator (VCO), and buffer stage. The amplifier amplifies and shapes the input signal. The VCO is responsible for generating the desired frequency. The buffer stage amplifies and provides isolation between the VCO and the output circuit. The output circuit is responsible for providing the amplified and regulated output signal.

The temperature compensation circuit is used to adjust the oscillator frequency in response to temperature variations. It is connected to a thermistor or thermocouple to sense the temperature changes and then adjusts the operating frequency of the oscillator accordingly. The oscillation control circuit is used to adjust the operating frequency by adding or subtracting capacitance on the quartz crystal. The matching circuit is used to match the output signal to the desired output level.

The SIT8208AC-3F-28S-19.200000T oscillator is a highly stable, 200MHz oscillator that is highly reliable and offers good accuracy and temperature stability. It is widely used in various applications where precise and reliable timing and frequency control is required. The oscillator is also relatively easy to use and can be implemented with minimal hardware and software development cost.

The specific data is subject to PDF, and the above content is for reference