SIT8208AC-G2-28S-48.000000Y

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	70µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.106" L x 0.094" W (2.70mm x 2.40mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	33mA
Operating Temperature:	-20°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	SiT8208
Voltage - Supply:	2.8V
Output:	LVCMOS, LVTTL
Function:	Standby (Power Down)
Frequency:	48MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are electronic circuits that generate a periodic waveform. They are used in applications that require a continuous source of oscillating signals such as timers, frequency counters, data transmission systems, signal control and modulation systems, etc. SIT8208AC-G2-28S-48.000000Y is a model of an oscillator manufactured by Sitronix Corporation, a USA-based manufacturer of ICs that specializes in oscillator products. This oscillator is a sophisticated low-cost, high-frequency, programmable oscillator that can be used for a variety of applications.

Application Field

The SIT8208AC-G2-28S-48.000000Y oscillator can be used in a wide range of applications, including clock and timing applications, communications networks, and industrial control systems.In clock and timing applications, the SIT8208AC-G2-28S-48.000000Y oscillator can be used to generate waveforms that are used to control the timing and speed of digital systems. It is particularly suitable for systems that require a high degree of accuracy and precision.In communications networks, the SIT8208AC-G2-28S-48.000000Y oscillator can be used to generate signals for transmitting data over long distances. It can also be used in industrial control systems to generate signals that can be used to control and coordinate various processes.

Working Principle

The SIT8208AC-G2-28S-48.000000Y oscillator is based on the principle of oscillation. This principle states that when a voltage is applied to a circuit, it will generate an output signal that is proportional to the voltage.The oscillator circuit of the SIT8208AC-G2-28S-48.000000Y consists of two parts: a voltage-controlled oscillator (VCO) and a charge pump. The VCO is the component that generates the output signal, while the charge pump is used to adjust the output frequency.The operation of the voltage-controlled oscillator is based on the phenomenon of negative-resistance. When a voltage is applied to the input of the VCO, it will generate a negative resistance, which is proportional to the applied voltage. This negative resistance then causes the VCO to start oscillating and generate an output signal.The charge pump is used to control the frequency of the output signal. The charge pump is connected to the VCO and adjusts the frequency of the output signal by changing the voltage supplied to the VCO.The combination of the VCO and the charge pump enables the SIT8208AC-G2-28S-48.000000Y oscillator to generate a high-accuracy, high-frequency, programmable oscillator that can be used for a variety of applications.

Conclusion

The SIT8208AC-G2-28S-48.000000Y oscillator is a sophisticated low-cost, high-frequency, programmable oscillator that can be used for a variety of applications. It can be used in clock and timing applications, communications networks, and industrial control systems. Its operation is based on the principle of oscillation and the use of a voltage-controlled oscillator and a charge pump to generate an output signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description