SIT8208AC-GF-18S-20.000000Y

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.106" L x 0.094" W (2.70mm x 2.40mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	31mA
Operating Temperature:	-20°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	SiT8208
Voltage - Supply:	1.8V
Output:	LVCMOS, LVTTL
Function:	Standby (Power Down)
Frequency:	20MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Oscillators are electronic devices that generate alternating current (AC) signals used in digital circuits and other applications requiring a high frequency signal. The SIT8208AC-GF-18S-20.000000Y oscillator is a type of oscillator with a wide range of applications, from audio applications to communication applications. In this article, we will discuss the application field and working principle of the SIT8208AC-GF-18S-20.000000Y oscillator. Application Field of SIT8208AC-GF-18S-20.000000Y
SIT8208AC-GF-18S-20.000000Y is a type of CMOS oscillator with a frequency range of up to 20MHz and a stability of +/-20ppm. It is a high-precision oscillator with low power consumption. It is widely used in a variety of applications, including industrial automation, consumer electronics, medical equipment, telecommunications, and automotive/avionics. At the industrial automation level, the SIT8208AC-GF-18S-20.000000Y is used to convert digital signals into analog signals for precise control of machinery and equipment. For example, it can be used to control the speed of a motor, the direction of a robot arm, or the tilt of a crane boom. It is also used to monitor, adjust, and control process parameters such as temperature, pressure, flow rate, and pH level. In consumer electronics, the SIT8208AC-GF-18S-20.000000Y is used to generate timing signals for the control of electronic displays, audio systems, and power amplifiers. It is also used in interactive systems such as gaming consoles to provide a consistent timing signal for synchronizing sound and animation. In medical equipment, the SIT8208AC-GF-18S-20.000000Y is used for the precise timing of electrophysiological signals such as electrocardiographic signals and EEG signals. It can also be used to control the timing of blood pumps for hemodialysis systems. In telecommunications, the SIT8208AC-GF-18S-20.000000Y is used for the timing of radio frequency (RF) signals in communication systems such as Wi-Fi, Bluetooth, and cellular networks. It is also used to control the timing of digital transmission signals in digital data transmission systems such as Ethernet. The SIT8208AC-GF-18S-20.000000Y is also used for the precise timing of signals in automotive and avionics systems. In cars, it is used to time the operation of fuel pumps, ECUs, and other control systems. In aircraft, it is used to time the operation of avionic systems such as attitude indicators, air data computers, and navigation systems.Working Principle of SIT8208AC-GF-18S-20.000000Y
The SIT8208AC-GF-18S-20.000000Y oscillator is a type of CMOS oscillator that uses a capacitive-resistor (CR) network to generate alternating current signals. The oscillator consists of two components: an oscillator circuit and an amplifier circuit. The oscillator circuit consists of a capacitor connected in series with a resistor and it is the component that generates the AC signal. The oscillator circuit is connected to the amplifier circuit which amplifies the oscillator signal and outputs it. The oscillator works by using the capacitive-resistor network to create a continuously varying voltage level. This voltage level causes the amplifier to switch “on” and “off” rapidly, generating a rapidly changing AC signal. This AC signal is then used in applications that require a high frequency signal. The frequency of the oscillator signal is determined by the capacitance of the capacitor and the resistance of the resistor. The frequency can be adjusted by changing the values of the capacitor and resistor. The frequency stability of the oscillator is determined by the values of the capacitor and resistor, as well as by the temperature and voltage changes in the environment.Conclusion
The SIT8208AC-GF-18S-20.000000Y oscillator is a type of CMOS oscillator with a wide range of applications from industrial automation to consumer electronics. It can be used to generate alternating current signals for a variety of applications requiring precise timing. The oscillator works by using a capacitive-resistor (CR) network to generate a rapidly changing AC signal. The frequency of the signal can be adjusted by changing the values of the capacitor and resistor, and the stability of the signal can be maintained by compensating for temperature and voltage changes in the environment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description