SIT8208AI-22-18S-33.333330X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits that produce a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators and related circuits are used in almost every electronic device, including cell phones, radio transmitters, digital clocks, televisions, and many other consumer electronics. The SIT8208AI-22-18S-33.333330X oscillator is an example of a dual-mode oscillator with low-noise and extremely low phase jitter. This specific oscillator is used in a wide variety of applications, with its main application field being in high-speed network and computing systems.

The SIT8208AI-22-18S-33.333330X oscillator has two modes of operation: an output frequency operating mode and a stop frequency operating mode. In the output frequency mode, the oscillator is used to generate a clock signal with a specified frequency. In the stop frequency mode, the oscillator is used to halt oscillation when a certain frequency is reached. This is especially helpful in applications that require synchronization between two systems. It can also be used to reduce or eliminate signal bounce, which occurs when a signal transitions too quickly between two frequencies.

The SIT8208AI-22-18S-33.333330X oscillator can produce frequencies ranging from 33.3333 MHz to 66.6667MHz. It has a very linear frequency response and extremely low phase jitter, allowing for highly accurate measurements and frequency synthesizers. The output signal has a low-noise spectrum, meaning that the signal can be accurately measured without being contaminated by external noise sources. In addition, the oscillator has a very wide dynamic range, allowing it to work with both narrowband and broadband communications systems.

In terms of operation, the oscillator is driven by two independent, low-power voltage-controlled oscillators (VCOs). The VCOs are connected to a variable-gain amplifier, which is used to control the frequency output of the oscillator. The amplifier is also connected to a feedback loop, which is used to adjust the gain of the amplifier. This ensures that the output signal remains accurate and stable, even with changes in temperature. The oscillator is also equipped with a duty cycle adjuster, which allows the user to fine-tune the output signal.

The SIT8208AI-22-18S-33.333330X oscillator is a powerful and versatile tool for a variety of applications. It can be used in high-speed network and computing systems, radio transmitters, digital clocks, and even in some consumer electronics. Its low-noise spectrum and low phase jitter make it the perfect choice when an accurate and reliable source of signals is needed.

The specific data is subject to PDF, and the above content is for reference