SIT8208AI-32-28E-72.000000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are commonly used in electrical engineering and electronics to generate a sinusoidal signal waveform. The SIT8208AI-32-28E-72.000000X is an oscillator with a frequency range of between 32 and 72MHz, and it is primarily used in microprocessors, Digital-to-Analog Converters (DAC’s), and Radio Frequency (RF) applications.

The SIT8208AI-32-28E-72.000000X oscillator is comprised of an integrated circuit (IC) and a quartz crystal or resonator placed within a metal package. The IC includes two transistors, two resistors, and a capacitor. The quartz crystal or resonator has a frequency response of 32MHz to 72MHz. This oscillator is designed with a maximum frequency noise of +/- 50ppm. The output waveform of the SIT8208AI-32-28E-72.000000X oscillator is a sinusoidal signal.

The working of the SIT8208AI-32-28E-72.000000X oscillator is based on a phenomenon known as the Pierce Oscillator Model. In this model, two transistors are connected to both the quartz crystal and resistor. When a voltage is applied, an alternating current flows through the quartz crystal. This alternating current causes the quartz crystal to vibrate at a certain frequency which is determined by the capacitance and inductance of the quartz crystal and resistor. This frequency is then output as a voltage waveform (sinusoidal in this case).

The SIT8208AI-32-28E-72.000000X oscillator can be used in a variety of applications such as automotive control systems, power inverters, consumer electronics, digital signal processing, and communications systems. In automotive control systems, the oscillator is used to measure the engine speed and make sure that all other systems connected to the car’s engines are running at the same speed. In power inverters, the oscillator is used to convert DC power to AC power. In digital signal processing, the oscillator is used for timing purposes and the synchronization of data transfers. Lastly, in communications systems, the oscillator is used to send and receive data over a network.

The SIT8208AI-32-28E-72.000000X is a versatile oscillator which can be used in a multitude of applications due to its wide frequency range. It is reliable, accurate, and cost-efficient. The oscillator is also available in a variety of package sizes and frequencies to meet any particular application needs.

The specific data is subject to PDF, and the above content is for reference