SIT8208AI-32-28S-35.840000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is a device that produces a periodic electronic signal and is used in many applications where an electrical signal of known frequency, stability and waveform is required. The SIT8208AI-32-28S-35.840000X oscillator belongs to the class of linear oscillators and is known for its high frequency accuracy and low jitter of less than 0.5ps RMS. It is an ideal choice for applications where low power consumption, low cost and high performance are both required.

The SIT8208AI-32-28S-35.840000X oscillator is a CMOS low-power oscillator with spread-spectrum capabilities. The oscillator is available in a variety of package options from 5mm x 3.2mm to 7mm x 5mm, making it ideal for small form factor design such as mobile handsets, digital appliances, embedded systems, etc. This oscillator is very cost effective and is suitable for use in applications where low power consumption and high stability are required.

The main application field of the SIT8208AI-32-28S-35.840000X oscillator is in the generation of timing and clocking signals. It is also suitable for use in frequency synthesis and can generate signals for radio, microwave and data-transmission protocols, such as GSM, GPRS and EDGE. This oscillator is also often used in software-defined radio applications. The SIT8208AI-32-28S-35.840000X oscillator is also used in microprocessor-based systems such as PCs and embedded controllers.

The SIT8208AI-32-28S-35.840000X oscillator works on the principle of linear feedback systems. Basically, an oscillator system consists of a feedback loop, in which a gain element is in series with a phase shifting element. The output of the gain element is fed back to the input, which in turn produces a periodic signal. This signal is then filtered to produce a periodic waveform with the desired frequency.

The SIT8208AI-32-28S-35.840000X oscillator uses an on-chip voltage-controlled oscillator (VCO) to generate the periodic signal. The VCO is provided with a voltage input from an external source, which is used to set the frequency of the oscillator. An on-chip phase detector is also provided to detect the phase differences between the VCO output and a reference clock signal. The phase detector is used to adjust the frequency of the VCO, thereby producing the desired periodic signal.

The SIT8208AI-32-28S-35.840000X oscillator also features an internal wideband spread-spectrum modulator. This modulator is used to vary the carrier frequency and thus reduce the total radiated emission (EMI) of the oscillator. The SIT8208AI-32-28S-35.840000X oscillator is also provided with an input for an external reference signal, which can be used to further improve the frequency accuracy of the oscillator.

The SIT8208AI-32-28S-35.840000X oscillator is an ideal choice for many applications requiring a high-performance and low-cost oscillator. With its small size, low power consumption and high frequency accuracy, the SIT8208AI-32-28S-35.840000X oscillator is well-suited for a wide variety of applications, from portable and embedded systems to PC applications.

The specific data is subject to PDF, and the above content is for reference