SIT8208AI-8F-18S-16.369000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators, such as the SIT8208AI-8F-18S-16.369000X, are used in electronic circuits for many purposes. In essence, an oscillator is an electronic circuit that produces a repetitive, periodic oscillation, or signal, in an electrical circuit as an output. These oscillators are commonly used for timing, tone generation, and stabilization of frequency and synchronization of signals between electronic devices.

The SIT8208AI-8F-18S-16.369000X oscillator offers low jitter and excellent phase noise for reference clock applications. It has an outstanding 0ps RMS jitter over a wide frequency range,from 1kHz to 250MHz, and features low phase noise of -119dBc/Hz at 10kHz offset. The frequency stability is achieved by a temperature insensitive oscillator which has a ceramic wall design, resulting in a temperature coefficient of less than 0.2ppm/°C. It has a wide operating temperature range from -40°C to 85°C.

The SIT8208AI-8F-18S-16.369000X oscillator has a specific application field and working principle. It is used as a voltage-controlled crystal oscillator (VCXO) for providing an accurate frequency reference in radio frequency (RF) and microwave systems, such as in telecom, broadband, satellite and wireless systems. At the core of the oscillator is a high-precision crystal resonator, which serves as the frequency reference. The crystal resonator is placed in a sealed, temperature stabilized enclosure, to ensure that the frequency remains stable over temperature and time.

The oscillator is driven by the input voltage, which is typically supplied by a voltage controlled attenuator (VCA). The VCA adjusts the input frequency to provide the desired output frequency. The oscillator is then tuned to the appropriate frequency by applying a small voltage to the oscillator via the VCA. The output frequency is then monitored to ensure that the oscillator remains in the expected frequency range.

Once the oscillator has been tuned, the output frequency is generated and provided as an output signal. The cycle repetition rate of the output signal is dependent on the characteristics of the crystal oscillator and the input voltage. The output frequency is typically much higher than the input frequency, and the frequency ranges depend upon the characteristics of the crystal oscillator and the external components connected to it.

The SIT8208AI-8F-18S-16.369000X oscillator is used in many applications where a high-precision frequency reference is needed. This type of oscillator is ideal for telecom, satellite, and wireless applications, as well as industrial and medical applications. Its low jitter and excellent phase noise performance make it an ideal choice for reference clock applications. Its wide operating temperature range also makes it suitable for use in harsh environmental conditions.

The specific data is subject to PDF, and the above content is for reference