SIT8209AC-G3-25E-133.333330X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are one of the most important components in electronic circuit design. It is an electrical or electronic circuit that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. The SIT8209AC-G3-25E-133.333330X oscillator is a widely used high-performance oscillator used for frequency multipliers and precision timing generators in frequency modulation (FM) transmitters, frequency modulators, digital-to-analog converters, digital frequency synthesizers, and more.

The SIT8209AC-G3-25E-133.333330X oscillator uses a crystal as a resonator to maintain a highly-stable frequency. The crystal is a mechanical device inside the oscillator which vibrates due to an electronic signal applied to it. This vibrational frequency is determined by the physical properties of the crystal, and is thus a highly constant frequency. This frequency is then amplified and used to generate the oscillations that are seen in other electronic circuits.

The oscillator is designed to operate in the frequency range of 8 x 10^12 to 10 x 10^12 Hz (26 - 33.333MHz). It is also designed to operate with a temperature range from -20°C to +70°C, and a phase noise of -112.2dBc/Hz at a 1MHz offset. The operating voltage of the oscillator is 3.3V and the power consumption is 6.25mW. The device also has an output current up to 8mA, and the output waveform is square wave.

The SIT8209AC-G3-25E-133.333330X oscillator is mainly used in FM transmitters and frequency modulators, as well as in high-speed digital-to-analog converters and digital frequency synthesizers. It is also often used for precision timing and clock generation in digital systems. The high-performance and low-cost design of this oscillator make it an ideal choice for many applications, from consumer electronics to industrial and automotive applications.

The working principle of the SIT8209AC-G3-25E-133.333330X oscillator is simple. An electronic signal is applied to the crystal, and this signal causes the crystal to vibrate at a highly stable frequency. This frequency is then amplified and used to generate the oscillations that are seen in other electronic circuits. The crystal and the circuit itself form a feedback loop, allowing the oscillator to maintain a constant frequency with minimal side effects.

The SIT8209AC-G3-25E-133.333330X oscillator is an ideal choice for many applications, from consumer electronics to industrial and automotive applications. Its low power usage and high performance make it ideal for use in frequency modulation transmission systems, digital-to-analog converters, frequency synthesizers, and more. It is also highly reliable and cost-effective, making it a great choice for many electronic and electrical products.

The specific data is subject to PDF, and the above content is for reference