SIT8209AI-33-18S-150.000000X

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	33mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT8209
Voltage - Supply:	1.8V
Output:	LVCMOS, LVTTL
Function:	Standby (Power Down)
Frequency:	150MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

SIT8209AI-33-18S-150.000000X is an Oscillator, which belongs to a class of electronic circuits that produces a periodic signal. It is an important component in many modern electronic systems as it is used to control the timing and synchronization of signals and processes. This article will discuss the application field and working principle of SIT8209AI-33-18S-150.000000X Oscillator.

Application Fields:

Oscillators are used in a wide range of applications, from consumer electronics and computers to industrial applications and telecommunications. Its specific function depends on the type of oscillator and the application. One application area of SIT8209AI-33-18S-150.000000X is in telecommunication systems where it acts as a frequency synthesis to generate precise carrier frequencies for radio and other communication systems. Other common application areas are in computers, consumer electronics, audio equipment, measuring instruments, and medical systems.

Working Principle:

SIT8209AI-33-18S-150.000000X Oscillator works by converting electrical energy into a continuous alternating current (AC) which fluctuates between two values over a period of time. Essentially, the oscillator is an amplifier combined with a feedback circuit which causes the output of the amplifier to oscillate between the two predetermined values.The output of the amplifier is usually fed back to the input in order to sustain the oscillations. This feedback loop is created using components such as resistors, capacitors, and inductors which form a filter circuit that reduces the level of unmatched frequencies, while amplifying the desired frequency.The circuit also contains an oscillator element such as a transistor, diode, or crystal, which determines the frequency of the oscillations. The frequency of the oscillations is determined by the time constant of the filter circuit, which is in turn determined by the values of the components used. The frequency can be manipulated by modifying the values of the components in the filter circuit or by adding additional components.

Conclusion:

SIT8209AI-33-18S-150.000000X is a type of Oscillator which is used in many electronic applications where precise timing signals and frequency synthesis are required. It works by converting electrical energy into a continuous alternating current which fluctuates between two values over a period of time and is controlled by a feedback loop created using components such as resistors, capacitors, and inductors and an oscillator element such as a transistor, diode, or crystal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description