SIT8920BM-82-33S-1.000000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is an electronic circuit that generates a periodic, oscillating electronic signal, with applications such as frequency division multiplexing and stabilization of circuits. SIT8920BM-82-33S-1.000000Y is an example of such a device, and is designed for frequency control of electronic and communications services. It is a low-jitter, low-power quartz crystal oscillator module with a form factor that can easily integrate into systems.

The SIT8920BM-82-33S-1.000000Y consists of a quartz crystal, a temperature compensated active circuitry and a high-performance amplifier. It has a low frequency stability of 0.2 ppm after warm-up, and a temperature stability of ±0.2 ppm/°C. Its operating temperature range spans from -40°C to +85°C.

The active circuitry in the unit includes the active bias and gain feedback stage, which is designed to provide optimum performance and linearity. The gain feedback loop ensures that the tuning range of the oscillator is within the range of the tuned frequency, and the temperature compensated circuit ensures that the oscillator output will remain within tolerance of the desired frequency over time and temperature.

The amplifier of the SIT8920BM-82-33S-1.000000Y is designed for good signal to noise ratio and low phase noise. Its input impedance is less than 1 Ω and its output impedance is less than 1 Ω. The amplifier can deliver a drive of up to 45 mW with a distortion rate of less than 0.05%.

The quartz crystal used in the SIT8920BM-82-33S-1.000000Y is a special type, designed to have superior performance. It has been constructed to minimize thermal aging effects and to achieve low ageing rates and long-term stability. The crystal is also extremely resistant to shock and vibration, and its temperature characteristics have been optimized for reliable timekeeping.

The SIT8920BM-82-33S-1.000000Y is suitable for a wide variety of applications in frequency control and electronic service applications. It is designed for use in embedded systems such as military and aerospace, automotive, cellular phones, medical devices, and computer/networking systems. It can also be used in systems where stable frequencies are required for accurate timekeeping, frequency division multiplexing, and stability of circuits.

To sum it up, the SIT8920BM-82-33S-1.000000Y is a low-jitter, low-power quartz crystal oscillator module that is suitable for frequency control in a variety of applications. It has a low frequency stability of 0.2ppm after warm-up, and a temperature stability of ±0.2ppm/°C. Its active circuitry includes an active bias and gain feedback stage, and its amplifier has a distortion rate of less than 0.05%. With its robust and reliable construction, it is an ideal choice for a wide range of frequency control applications.

The specific data is subject to PDF, and the above content is for reference