SIT8924BM-12-33N-4.000000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are widely used in electronic circuits as signal sources and timers. They can be used in applications ranging from simple clock pulses to complicated radio-frequency generators. SIT8924BM-12-33N-4.000000D is a type of oscillator in which an alternating current or voltage is produced by a circuit in which a periodic change in some electrical or mechanical characteristic is maintained by a feedback system.

Application Field

The SIT8924BM-12-33N-4.000000D oscillator is applicable for a variety of electronic products. It fits for use in 5V, 4V, and 3V systems such as mobile phones, elctronic toys, set-top boxes, DVD players and so on. It could also be used for communications and consumer electronics.

Working Principle

The working principle of SIT8924BM-12-33N-4.000000D is based on a relaxation oscillator circuit. It uses a capacitor and a resistor as dynamic components. A voltage is applied to the capacitor, and the capacitor charges to a certain threshold voltage. After reaching the threshold, the capacitor will start to discharge and produce an oscillating waveform. The rate of oscillation depends on the value of the resistor, the threshold voltage, and the current supply to the oscillator circuit. The frequency of the output oscillation can be controlled by changing any of these parameters.

SIT8924BM-12-33N-4.000000D oscillator contains a set of P-MOSFETs, which are connected in series. When the current flows through the P-MOSFETs, the resistance of each P-MOSFET changes according to the supply voltage. This depends on the threshold voltage of each P-MOSFET. Therefore, the frequency of the oscillation is a function of the supply voltage and the threshold voltage of the P-MOSFETs.

In addition, the SIT8924BM-12-33N-4.000000D oscillator also includes a comparison circuit, which compares the current flowing through the P-MOSFETs and the reference voltage. The oscillation is increased or decreased depending on this comparison.

The oscillator also uses a low-pass filter to remove any noise from the output signal. The filter consists of series and parallel capacitors and resistors. This filter will help to limit the frequency of the output signal and suppress any high-frequency content in the signal.

The SIT8924BM-12-33N-4.000000D oscillator is also equipped with an enable/disable pin, which allows the user to turn the oscillator ON and OFF. By setting this pin to HIGH, the oscillator will be enabled and it will continue to oscillate. When the pin is set to LOW, the oscillator will be disabled and it will no longer oscillate.

The SIT8924BM-12-33N-4.000000D oscillator also includes an internal voltage regulator, which helps to regulate the supply voltage and prevent the oscillator from exceeding a certain voltage threshold. This helps to ensure that the oscillator operates at a stable and consistent frequency.

In summary, the SIT8924BM-12-33N-4.000000D oscillator is a reliable oscillator which is applicable for a variety of electronic products. It uses a relaxation oscillator circuit, along with P-MOSFETs, a comparison circuit, a low-pass filter, and an enable/disable pin for maximum flexibility and reliability.

The specific data is subject to PDF, and the above content is for reference