SIT9002AI-23N33DO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators are components of integrated circuits which provide a time base signal with an adjustable frequency. These oscillators can be configured to meet the exacting requirements of almost any electronic application. The SIT9002AI-23N33DO is one example of such a programmable oscillator. It is a versatile programmable oscillator which can be used for a wide range of applications in industrial and consumer electronics.

The SIT9002AI-23N33DO is an integrated circuit with two signal input pins, two signal output pins, and a control input pin. The signal output pins can be used to generate periodic signals ranging from 0.25 MHz to 8 MHz. The signal can also be programmed for different frequency variants, allowing for frequency modulation capabilities. The control input is used to set and adjust frequency range, duty cycle, and distortion parameters of the signal.

The SIT9002AI-23N33DO can be used in a variety of applications. It is used in radio receivers and transmitters to generate RF carrier signals. It is used in automation and industrial control applications to generate timing pulses. It is used in telecommunications devices such as modems to generate continuous tones that serve as digital carrier signals. In medical imaging, it is used to generate the ultrasonic waves which are used to construct images of internal organs.

The working principle of a programmable oscillator such as the SIT9002AI-23N33DO is based on the oscillatory behavior of the circuit elements and the control elements. The oscillation is initiated by the two signal input pins, which act as the sources of alternating current. The alternating current is then passed through a network of resistors, capacitors, and transistors connected in a specific circuit configuration. This passive network forms the body of the oscillator circuit. The configuration of the network is responsible for the frequency and distortion of the output signal.

The frequency, duty cycle, and distortion parameters of the output signal are adjustable by varying the control voltage fed to the control input pin. This control voltage is supplied by the system microcontroller, and its value can be adjusted to set the desired frequency, duty cycle, and distortion. The oscillator circuit will adjust the output signal accordingly.

In summary, the SIT9002AI-23N33DO is a programmable oscillator which can be used for a variety of applications. The oscillator works by creating an oscillatory behavior of the circuit elements, with the frequency and distortion parameters adjustable by the control voltage fed to the control input pin. This makes the SIT9002AI-23N33DO a versatile programmable oscillator suitable for both industrial and consumer electronics.

The specific data is subject to PDF, and the above content is for reference