SIT9002AI-33H33ED

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators, like SIT9002AI-33H33ED, offer digital control and programmability to perform various functions. They can be used in various applications including frequency control, power control, shape control, phase correction and randomization. The oscillators can operate in a wide range of frequencies, from 200 MHz to greater than 1 GHz. The programmable oscillators are typically configured for a single frequency range or for a limited frequency range. It is typically configured for either a specific application or a set of applications. Programmable oscillators provide greater flexibility than analog oscillators, allowing users to make more customized changes to the frequency output.

The working principle of programmable oscillators like SIT9002AI-33H33ED is based on the current controlled oscillator (CCO) architecture. The current controlled oscillator has a gate, an active circuit component, and an oscillator output. The gate is a three terminal device that allows the flow of current or voltage between the terminals. The active component provides the necessary feedback for the oscillator and can be either an amplifier or a diode. The oscillator output is the signal generated by the active component. The current can be applied to the gate to adjust the frequency output of the oscillator.

The frequency of the oscillator can be adjusted by the user. To increase the frequency, the current applied to the gate must be increased. To decrease the frequency, the current applied to the gate must be decreased. In most cases, the frequency of the oscillator can be adjusted within a specified range. The programmable oscillator is usually programmed before being put into use. The programming procedure may involve entering the frequency values required into the user interface.

There are a number of applications where the SIT9002AI-33H33ED is particularly useful. Its ability to provide frequencies over a broad range, in increments as small as 10 Hz, makes it ideal for use in applications where precise control of the frequency is required. It can also be used for frequency division and for providing a stabilized frequency for clocks, GPS systems, and video systems. The oscillator can also provide noise reduction and power control in digital signal processing and in communications systems.

The SIT9002AI-33H33ED is a highly flexible programmable oscillator which can be used in many applications. In addition to the frequency control, it can be programmed for power control, shape control, phase correction, and randomization. It is able to provide frequencies over a broad range and in increments as small as 10 Hz. It is ideal for use in applications where precise control of the frequency is required and is also useful for frequency division, providing a stabilized frequency for clocks, GPS systems and video systems, and providing noise reduction and power control in digital signal processing and communications systems.

The specific data is subject to PDF, and the above content is for reference