SIT9002AI-38N33EQ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are a type of oscillator that can be programmed using an external interface to allow a user to customize the oscillator frequency, phase and amplitude according to their application requirements. The SIT9002AI-38N33EQ is a programmable oscillator that offers a range of features that make it ideal for a variety of applications.

The SIT9002AI-38N33EQ is a low-cost, frequency-controlled oscillator. It has a frequency range of 7.5KHz to 300MHz, with a frequency programming resolution of 1.25, 2.5 and 5kHz, depending on the selected frequency range. The SIT9002AI-38N33EQ also features a two-pin evaluation controller for programming via external bus interface. The device can be programmed to adjust frequency, phase, and amplitude. It has a high dynamic frequency resolution of 30kHz, which allows for fast programming.

The SIT9002AI-38N33EQ also features an internal oscillator for synchronization and timing control. The internal oscillator can be configured to output high-resolution frequency outputs, allowing for precise timing control. The device includes over-temperature protection, brown-out protection, reverse-polarity protection, and optional frequency range selection. The device also provides various output types, including CMOS, LVPECL, and LVDS outputs.

The SIT9002AI-38N33EQ is suitable for many applications, including telecommunications, base station transceivers, data networks, and telecom systems. In telecom applications, the SIT9002AI-38N33EQ can be used to generate reference clocks and system timing signals, as well as control transmission frequencies.

In communications systems, the SIT9002AI-38N33EQ can be used to generate frequencies for data carriers and timing signals for master and slave clocks. It can also be used to generate stable signals for modulation and demodulation.

The SIT9002AI-38N33EQ can also be used in data networks. It can generate stable data-receive and transmit clocks and frequencies for communication in digital networks. It can also be used to generate reference frequencies for digital signal processing.

The SIT9002AI-38N33EQ is also ideal for base station transceivers. The device can generate steady and reliable reference clocks for the base station signals, making it more stable and accurate. It can also be used to control the frequency of the modulation signal.

The working principle of the SIT9002AI-38N33EQ is simple. The device takes a signal from an external source, such as an oscillator or crystal, and processes it before sending the resulting signal to the output. The device has a built-in clock generator module and a DSP-based timing and synchronization module that processes the signal. The device also has a voltage-controlled oscillator (VCO) that is used to generate the output frequency. It also has a PLL-based frequency synthesizer, which helps in programming the output frequency and phase.

The SIT9002AI-38N33EQ is a cost-effective and reliable programmable oscillator that is ideal for a variety of applications such as base station transceivers, telecommunications, data networks, and telecom systems. It offers a wide frequency range, high dynamic frequency resolution, and adjustable phase and amplitude control. The SIT9002AI-38N33EQ also has a dedicated controller, voltage-controlled oscillator, and frequency synthesizer, allowing for fast and reliable programming.

The specific data is subject to PDF, and the above content is for reference