SIT9003AC-2-18DD

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	800nA
Height:	0.031" (0.79mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3.5mA
Spread Spectrum Bandwidth:	±0.50%, Center Spread
Operating Temperature:	-20°C ~ 70°C
Frequency Stability (Total):	±50ppm
Series:	SiT9003
Voltage - Supply:	1.8V
Output:	LVCMOS, LVTTL
Function:	--
Available Frequency Range:	1MHz ~ 75MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are units that are designed to generate either a stable, frequency-specific signal or multiples of such a signal. An example of a programmable oscillator is the SIT9003AC-2-18DD, which is a cost-effective, programmable timing solution for many applications. The SIT9003AC-2-18DD is capable of user-defined output frequencies between 24 kHz and 40 MHz.The SIT9003AC-2-18DD is an oscillator with a programmable digital control input. The digital control input signals the frequency at which the oscillator will run. The oscillator can be programmed to output frequencies from 24 kHz, up to 40 MHz, at 0.01% accuracy. The frequency can be adjusted by using the internal divider, by selecting the desired output frequency, or by applying a external clock signal. With the help of additional components, such as capacitors, the output signal of the oscillator can be modified or enhanced.The SIT9003AC-2-18DD uses a low-power CMOS circuit design for the oscillator. This design allows the oscillator to run at extremely low power levels, making it perfect for applications that require power efficiency. The oscillator can be used in conjunction with a variety of other devices, including microcontrollers, CPUs, and digital signal processors.The SIT9003AC-2-18DD can be used in a wide range of applications, such as in embedded systems, portable electronics, audio and medical devices, and telecommunication equipment. It can be used to generate a variety of signals, including clocks, digital waveforms, trigger signals, and voltage-controlled oscillators. It can also be used in the synchronization and the synchronization of digital systems. The SIT9003AC-2-18DD features a high level of programmability and is highly reliable, making it a valuable timing solution for many applications. The programmable oscillator also features an extremely low phase noise level, making it an ideal choice for applications where a low level of signal distortion is required. The SIT9003AC-2-18DD is a highly efficient and cost-effective alternative to traditional quartz oscillators. The working principle of the SIT9003AC-2-18DD is relatively straightforward. When a digital control input is applied, the divider generates a signal that is used as the main source of clock signals. This signal is then passed through the pre-divider and further divided by a programmable digital input. The output of this process is then fed to the oscillator’s output port. The oscillator then produces the desired frequency, which is then amplified and delivered to the desired point. The SIT9003AC-2-18DD is an excellent choice for applications that require a cost effective, programmable timing solution. Its low power, high programmability, and low phase noise make it an ideal choice for many applications, including embedded systems, portable electronics, and digital systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description