SIT9005ACA1D-25SJ

Frequency Stability (Total):	--
Current - Supply (Disable) (Max):	4.3µA
Height:	0.030" (0.76mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	6.5mA
Spread Spectrum Bandwidth:	-2.62%, Down Spread
Operating Temperature:	-20°C ~ 70°C
Series:	SIT9005
Frequency Stability:	±20ppm, ±25ppm, ±50ppm
Voltage - Supply:	2.5V
Output:	LVCMOS
Function:	Standby
Available Frequency Range:	1MHz ~ 141MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	SSXO
Base Resonator:	MEMS
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators Programmable oscillators have been developed over the years in the field of electronics. This is mostly because the nature of the signals in a digital system needs to vary depending on the application. This makes it difficult for a single oscillator design to accommodate all of the potential variations in frequencies that may be required in a digital system. A Programmable Oscillator solves this problem by allowing the user to easily customize the frequency output of the oscillator using software and hardware. The SIT9005ACA1D-25SJ Programmable Oscillator is a high-performance oscillator capable of delivering frequencies in the range of 3.5 to 10 MHz. It is designed for general purpose applications such as automotive, industrial, medical, and aerospace. The SIT9005ACA1D-25SJ is a surface mount oscillator that is based on a traditional Pierce Oscillator configuration, which require a single tuned crystal. The SIT9005ACA1D-25SJ uses a frequency-determining network of passive components to set and modify the output frequency. The SIT9005ACA1D-25SJ features a frequency modulation request (FMR) terminal and digital control pins to provide the user with the flexibility to adjust the output frequency. The FMR terminal is used to adjust the output frequency over an extended frequency range. The digital control pins allow the oscillator frequency to be adjusted without external components, by directly programming the digital frequency applied at the control pins. This allows for very fine adjustability of the output frequency by the user. The SIT9005ACA1D-25SJ also features dual-supply operation. It has the ability to operate from both a positive and negative voltage supply. This is useful in applications that require a concentration of power to be used in a limited area.The SIT9005ACA1D-25SJ has other features that are useful in different applications. It provides a high locking ratio, which is useful for synchronous applications such as high speed serial-interfacing. It also offers low phase noise which is important for applications that are noise-sensitive. The high frequency stability makes it ideal for use in devices that need to maintain a specified frequency output over long-term operation. Overall, the SIT9005ACA1D-25SJ is a versatile programmable oscillator that can provide the user with a wide range of adjustability along with a high level of performance. Its features make it well suited for use in applications such as automotive electronics, medical instrumentation, telecommunications, and industrial control systems.

Programmable Oscillators

Programmable oscillators have been developed over the years in the field of electronics. This is mostly because the nature of the signals in a digital system needs to vary depending on the application. This makes it difficult for a single oscillator design to accommodate all of the potential variations in frequencies that may be required in a digital system. A Programmable Oscillator solves this problem by allowing the user to easily customize the frequency output of the oscillator using software and hardware.

The SIT9005ACA1D-25SJ Programmable Oscillator is a high-performance oscillator capable of delivering frequencies in the range of 3.5 to 10 MHz. It is designed for general purpose applications such as automotive, industrial, medical, and aerospace. The SIT9005ACA1D-25SJ is a surface mount oscillator that is based on a traditional Pierce Oscillator configuration, which require a single tuned crystal. The SIT9005ACA1D-25SJ uses a frequency-determining network of passive components to set and modify the output frequency.

The SIT9005ACA1D-25SJ features a frequency modulation request (FMR) terminal and digital control pins to provide the user with the flexibility to adjust the output frequency. The FMR terminal is used to adjust the output frequency over an extended frequency range. The digital control pins allow the oscillator frequency to be adjusted without external components, by directly programming the digital frequency applied at the control pins. This allows for very fine adjustability of the output frequency by the user.

The SIT9005ACA1D-25SJ also features dual-supply operation. It has the ability to operate from both a positive and negative voltage supply. This is useful in applications that require a concentration of power to be used in a limited area.

The SIT9005ACA1D-25SJ has other features that are useful in different applications. It provides a high locking ratio, which is useful for synchronous applications such as high speed serial-interfacing. It also offers low phase noise which is important for applications that are noise-sensitive. The high frequency stability makes it ideal for use in devices that need to maintain a specified frequency output over long-term operation.

Overall, the SIT9005ACA1D-25SJ is a versatile programmable oscillator that can provide the user with a wide range of adjustability along with a high level of performance. Its features make it well suited for use in applications such as automotive electronics, medical instrumentation, telecommunications, and industrial control systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description