SIT9005ACL1H-XXDP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators are oscillators whose output frequency, phase characteristics, and duty cycle can be changed by either an external/internal digital input or an analog control voltage. They are widely used in industrial equipment and consumer electronic products. The SIT9005ACL1H-XXDP is a Programmable Oscillator, and it has excellent modulation performance, low phase noise, and wide frequency range.

The SIT9005ACL1H-XXDP Programmable Oscillator is a narrow band, off-the-shelf solution with a frequency range of 1-500MHz and a low phase noise of -175dBc/Hz at 10KHz offset. It is also capable of tuning bandwidths of up to 100MHz and can be easily programmed using a fast-locking phase-lock loop and onboard memory-storing capability, making it perfect for applications requiring rapid on-the-fly tuning. The SIT9005ACL1H-XXDP Programmable Oscillator also has a low power consumption, a wide dynamic frequency range, and high frequency stability over a wide temperature range.

The SIT9005ACL1H-XXDP Programmable Oscillator is ideal for applications where quick, accurate frequency and width tuning is needed. It can be used for communications networks such as Long Term Evolution (LTE), WiMAX, and Wireless Local Area Networks (WLAN). It can also be used for consumer electronics products such as Wi-Fi routers, cordless phones, and MP3 players. It is also suitable for industrial applications such as military applications, avionics, and radar systems.

The SIT9005ACL1H-XXDP Programmable Oscillator works on the principle of the phase-locked loop (PLL) or charge pump (CP). The PLL is a self-oscillating circuit that locks in and tracks an input signal frequency by generating its own output of a particular frequency. The output frequency is determined by the frequency of the input signal and the loop characteristics of the PLL, such as the loop bandwidth and dampening factor. The loop gain of the PLL can be adjusted by varying the reference frequency and the dampening factor.

The Charge Pump (CP) on the other hand, is an electronic circuit that creates an alternating current (AC) signal from a direct current (DC) voltage. It consists of an amplifier connected to a diode bridge, which form a square-wave, low-pass filtered, AC output. The frequency of the output is determined by the input voltage and the loop bandwidth of the charge pump. The SIT9005ACL1H-XXDP Programmable Oscillator uses both the PLL and the CP to generate its outputs.

The SIT9005ACL1H-XXDP Programmable Oscillator can also be used for other applications such as spread-spectrum clock generators to reduce RFI and EMI, frequency synthesisers for generating reference frequencies and harmonic suppression in RF systems. It also has a low profile of only 11mm, making it perfect for applications where space is of key concern.

The SIT9005ACL1H-XXDP Programmable Oscillator is a wonderful piece of technology and its wide range of applications makes it an indispensable tool in industrial, commercial, and consumer electronic devices. Its low power consumption, wide dynamic frequency range, and excellent modulation performance make it an ideal choice for any application.

The specific data is subject to PDF, and the above content is for reference