SIT9005ACL2D-30EP

Frequency Stability (Total):	--
Current - Supply (Disable) (Max):	6.5mA
Height:	0.030" (0.76mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	6.5mA
Spread Spectrum Bandwidth:	-4.28%, Down Spread
Operating Temperature:	-20°C ~ 70°C
Series:	SIT9005
Frequency Stability:	±20ppm, ±25ppm, ±50ppm
Voltage - Supply:	3V
Output:	LVCMOS
Function:	Enable/Disable
Available Frequency Range:	1MHz ~ 141MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	SSXO
Base Resonator:	MEMS
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators: SIT9005ACL2D-30EP

Programmable oscillators are electronic devices that create electrical signals at specific, known frequencies. They are invaluable in the design of test and measurement systems, where accuracy and precision are essential. The SIT9005ACL2D-30EP is a high-precision, medium-frequency programmable oscillator designed to provide reliable and accurate performance.The SIT9005ACL2D-30EP is a dual-output oscillator that offers a wide frequency sweep range of 1 to 30 MHz and low phase noise (-60 dBc/Hz). It features a low power consumption (25mA) and has a temperature range of -30°C to +75°C. The SIT9005ACL2D-30EP also comes with an adjustable edge rate for improved control during the programming of output frequency.The SIT9005ACL2D-30EP is ideal for applications such as impedance measurement, signal generation and communications (including GSM/3G/4G). It can also be used for medical device testing, digital multi-meter measurements, RF signal generation and signal conditioning.The SIT9005ACL2D-30EP is designed to interface with a microcontroller or FPGA. The oscillator can be programmed through a 2-wire or 3-wire interface, allowing it to be tailored to individual applications. The oscillator can also be programmed to be an output source of a maximum 30 MHz signal while the other pin supplies a signal with a frequency of 1/3 of the maximum signal.The working principle of the SIT9005ACL2D-30EP is based on the generation of an oscillating output signal, which is produced by the conversion of an input signal into analog frequency through the internal phase-locked loop. The phase-locked loop works by using an external voltage-controlled oscillator to control the phase of the output signal. The phase-locked loop output is then used to control the frequency of the output signal. The SIT9005ACL2D-30EP works by producing a voltage-controlled oscillation with a wide frequency range. The frequency range is controlled by the external clock source and the onboard programmable frequency control register. This register can be programmed to produce the intended frequency output with the correct precision and accuracy.The SIT9005ACL2D-30EP also offers other features such as cycle-to-cycle jitter (1ps), a duty cycle range of 5 to 95%, a maximum duty cycle inaccuracy of 1%, a calibration temperature range of -25°C to 75°C and a power supply range of 2.2V to 3.3V. The SIT9005ACL2D-30EP is an ideal choice for applications that require reliable and precise frequency control. Its wide frequency range and accuracy make it suitable for many systems and applications. The oscillator also provides stable performance throughout its working temperature range, making it reliable in harsh environments. As such, the SIT9005ACL2D-30EP is a perfect choice for applications where reliable and accurate performance is required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description