SIT9005ACL2G-33NF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are devices that allow the frequency of an oscillator to be adjusted within a pre-determined range. Typically, programmable oscillators will feature inputs and outputs for settings such as center frequency, dead time, temperature compensation, and offset voltage. The SIT9005ACL2G-33NF is a programmable oscillator specifically designed for clock generation, which allows for the manipulation of a signal’s amplitude, frequency and phase without the need for extra components or complex circuitry.

Application Field: The SIT9005ACL2G-33NF is most suitable for use in industrial, automotive, and other electronic applications which require precise adjustment of the clock frequency. For example, this programmable oscillator can be used to generate the clock signals required for controlling the speed of motors, as well as in communication systems for adjusting the frequency of the communication signals. It is also widely used in control circuit applications for precise timing and synchronization.

Working Principle: The operating principle of the SIT9005ACL2G-33NF is rather simple; it uses two bipolar transistors to generate an oscillator which is then fed to a simple current-controlled oscillator (CCO). The CCO is programmed to generate an output signal with a predetermined frequency and duty cycle. The frequency of the output signal relies on the voltage it receives from the input. The oscillator is set to the desired frequency by voltage-to-frequency conversion. By controlling the bias current, the device can be tuned to a desired frequency over a range of 0.1 Hz to 133 MHz.

The SIT9005ACL2G-33NF is characterized by its small size and low power consumption. Compared to traditional quartz-based oscillators, the SIT9005ACL2G-33NF can offer higher flexibility and energy efficiency. Due to its wide frequency range and low power consumption, this programmable oscillator is highly suitable for applications which require high precision control and low power usage.

The SIT9005ACL2G-33NF also features a Programmable Output Voltage and Offset Output Voltage, both of which allow the user to further adjust the oscillator frequency. The Programmable Output Voltage adjusts the output voltage, which affects the frequency; while the Offset Output Voltage compensates for unwanted voltage shifts, providing more accurate frequency control.

In conclusion, the SIT9005ACL2G-33NF is a highly versatile programmable oscillator which offers precise frequency control in a wide range of applications. Its low power consumption and small size make it particularly suitable for industrial, automotive and other electronic applications which require precise timing and synchronization. It uses two bipolar transistors to generate an oscillator which is then fed to a simple current-controlled oscillator (CCO) for precise frequency control, and can also be adjusted with Programmable Output Voltage and Offset Output Voltage for further adjustments.

The specific data is subject to PDF, and the above content is for reference